Best current price£85.78from eBay
Shopping.co.uk recommended and popular offers
eBay£85.78Visit shop General Paints SCRATCH RESISTANT CLEARCOAT & ACTIVATOR 6.75 litre (H500 2.25)
Visit shop2 offers from £85.78 - £93.60
View price history by clicking the chart icon.
The General Paints 6.75L Scratch Resistant Clearcoat and Activator kit is designed for professional automotive technicians and experienced hobbyists seeking a high-durability finish. It delivers a robust, scratch-resistant protective layer that stands up to environmental wear, though it requires precise measurement and adequate ventilation due to its professional-grade 2K chemistry.
| Model Part Number | GR1000SR/4.5KIT2 |
|---|---|
| Brand | General Paints |
| Container Volume | 6750ml |
This kit requires a strict 2:1 mixing ratio of clearcoat to activator.
This is a 2K product, meaning it requires the inclusion of the activator to cure.
While it can be used for small areas, its fast-curing properties make it better suited for panel repairs or full-vehicle spraying.
Yes, because it is a 2K coating, you should use a respirator for isocyanates, chemical-resistant gloves, and eye protection.
It has a limited pot life due to the superfast activator; please refer to the technical data sheet provided with the container for the specific minute count.
Check the mixing ratio; an incorrect amount of activator will prevent proper polymerization. Also, ensure the ambient temperature is within the manufacturer's recommended range.
Adjust your spray gun settings (pressure and fluid flow) and ensure you are using the correct tip size for the viscosity of the clearcoat.
Verify the temperature of the spray booth, as heat significantly impacts the speed of the superfast activator.
To ensure success, mix the components at the exact 2:1 ratio using a calibrated mixing cup. Do not exceed the pot life of the mixture once the activator is added. Because this is a 2K (two-component) product, you must use a respirator rated for isocyanates and ensure the spray booth or work area is well-ventilated. Store the remaining clearcoat and activator in a cool, dry place with the lids tightly sealed to prevent moisture contamination. Clean all application tools immediately after use with an appropriate solvent to prevent the coating from hardening in your equipment.
