Best current price£22.70from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£22.70Visit shop Everbuild White 711 Tileset Flexiplus S2 Floor And Wall Tile Adhesive 20 Kg
Visit shop
B&Q£30.99Visit shop B&Q - Ts711We20 711 Tileset Flexiplus Tile Adhesive White 20Kg Evbts711We20
Visit shop9 offers from £22.70 - £56.15
View price history by clicking the chart icon.
The Everbuild 711 TileSet Flexiplus Tile Adhesive is a quick-setting, flexible tile mortar designed for floor and wall applications. It's ideal for DIYers and professionals needing to fix tiles on various surfaces, including timber and exterior projects, where same-day grouting is required. A key benefit is its enhanced flexibility due to added latex powder, reducing the risk of tile crack. However, users must ensure timber floors have adequate ventilation and use appropriate plywood.
| Colour | White |
|---|---|
| Model Part Number | 695062 |
| Brand | Everbuild |
Yes, the C2FTE S1 rating and flexibility make it suitable for large format tiles, provided the surface is prepared correctly and the adhesive is applied evenly using a large enough notched trowel.
Yes, it is suitable for interior wall and floor applications, including wet areas like shower enclosures, once fully cured.
Refer to the specific mixing instructions on the product packaging for the exact water ratio. Typically, around 4-4.5 litres of water per 20kg bag is required, but always check the manufacturer's guidance.
Store in a cool, dry place in its original sealed packaging. The shelf life is typically 12 months from the date of manufacture. Check the packaging for specific details.
No, wallpaper must be completely removed, and the underlying plaster or surface prepared before applying the tile adhesive.
Generally, no primer is needed on standard substrates like concrete or screeds. However, for existing tiles or potentially problematic surfaces like unskimmed plasterboard, specific surface preparation or a primer (like EVERBUILD PVA BOND) might be recommended as per the product instructions.
Ensure the surface was properly prepared (clean, dry, sound). Check that the correct amount of water was used for mixing and that the adhesive was applied evenly with a suitable trowel. Ensure tiles were pressed firmly into the adhesive.
This may indicate excessive movement. Ensure timber floors are adequately prepared and ventilated. For general use, the added latex in this adhesive should prevent this, but ensure substrate rigidity.
Work in smaller sections, especially in warm or windy conditions. Keep the mixed adhesive covered when not in use. Ensure you are using the correct water ratio; too little water can speed up drying.
Preparation is Key: Ensure all surfaces are clean, dry, and free from dust or grease. For concrete, screeds, and renders, a standard clean is usually sufficient. For unskimmed plasterboard and blockwork, ensure the surface is sound.
Timber Floors: Use only moisture-resistant exterior-grade plywood (minimum 12mm thick) securely screwed down. Ensure adequate ventilation beneath the timber floor to prevent moisture buildup.
Existing Tiling: Roughen the surface of existing tiles and apply a bonding coat of neat EVERBUILD PVA BOND before applying the adhesive.
Mixing: Mix the powder with clean water to a smooth, lump-free consistency. Follow the water ratio recommendations on the packaging precisely. Allow the mixed adhesive to stand for a few minutes before remixing briefly.
Application: Use a notched trowel to apply the adhesive evenly to the substrate or the back of the tile. Work in small sections to prevent the adhesive from drying out.
Curing: Allow at least 24 hours for the adhesive to cure fully before grouting, although same-day grouting is possible for walls and floors under dry conditions after initial set.
Care: Once cured, the tiled surface can be cleaned with standard household cleaners. Avoid harsh abrasive cleaners.
