Best current price£23.99from eBay
Shopping.co.uk recommended and popular offers
eBay£23.99Visit shop Polisport Fork Guards YAMAHA YZ125-250 15-23, YZ250F 10-23, YZ450F 10-22 Blue
Visit shop8 offers from £23.99 - £33.46
View price history by clicking the chart icon.
The Polisport Fork Leg Protectors (MPN: 716.11.64) are designed for off-road and street motorcycle enthusiasts looking to shield their fork stanchions from debris, rocks, and environmental wear. These guards offer a vital layer of protection that helps extend the lifespan of fork seals and tubes, though riders should note that they require specific compatibility verification with their motorcycle's fork diameter and mounting points before installation.
| Model Part Number | 716.11.64 |
|---|---|
| Brand | Polisport |
No, these are model-specific. Please verify your fork diameter and compatibility with the part number 716.11.64.
Typically, you do not need to remove the forks, but you may need to loosen the front axle or remove the front wheel for easier access to the lower mounting points.
Yes, Polisport uses high-quality plastics designed to resist fading from sun exposure.
While the plastic accepts paint, it is not recommended as paint will likely flake off due to the flex required for a proper fit.
They provide excellent protection against light road debris and small rocks, but they are not intended as crash guards for major impacts.
It is recommended to clean behind them during your routine bike wash to prevent mud and grit buildup.
Check all mounting bolts for tightness and ensure there are no missing vibration-damping washers.
Re-align the mounting bracket to ensure uniform clearance around the stanchion diameter.
Ensure the bike is on a level surface and verify that you are using the correct mounting hardware for your specific fork model.
Installation of the Polisport Fork Leg Protectors generally requires standard mechanic tools, including a socket set and potentially a bike stand to lift the front end for better access. Ensure your motorcycle's fork diameter is compatible with the 716.11.64 model specifications before attempting installation. To mount, align the guards with the existing mounting points on the fork legs and secure them using the provided hardware or the bike's stock fasteners. For care, keep the guards clean by rinsing them with low-pressure water after each ride. Avoid using harsh chemical degreasers that may degrade the high-impact plastic finish over time.
