Everyday Cutting Welding Torch Oxy Acetylene Gas Brazing Blow Pipe - AB Tools - NM18

This torch is designed to cut materials up to 12 inches (300mm) thick.

The torch is designed for use with an oxy-acetylene gas mixture.

No, this product is the torch assembly itself. You will need to provide your own compatible oxy-acetylene gas supply, including cylinders, regulators, and hoses.

While it's a reliable tool, oxy-acetylene equipment requires proper training and safety precautions. It is recommended for users with prior experience or those who have completed appropriate safety training.

ISO 5172 is an international standard that specifies the requirements for gas welding, cutting, and allied processes. Conformity indicates that the torch meets established safety and performance criteria.

The cutting tip should be kept clean using specialized tip cleaners. Regularly inspect it for any damage or obstructions that could affect performance. Clean gently to avoid widening the orifices.

Check gas supply is on, regulators are set correctly, and there are no blockages in the gas lines or tip. Ensure proper ignition procedure is followed.

Clean the cutting tip. Check for correct gas pressures and ensure no leaks exist in the hoses or connections. Verify the correct gas mixture is being used.

Increase oxygen and fuel gas pressures within safe operating limits. Ensure the cutting tip is the correct size for the material thickness and is clean. Maintain proper torch to work distance.

Immediately shut off gas supply. Inspect all connections and hoses for damage or looseness. Tighten connections or replace damaged components.