Best current price£5.99from eBay
Shopping.co.uk recommended and popular offers
eBay£5.99Visit shop White Curved Edge Wiring Accessories 10A 4G 2-Way Switch (on single plate)
Visit shopeBay£8.59Visit shop Knightsbridge CU4101 Curved Edge 10Amp 4 Gang 2 way Switch on Single Plate White
Visit shop2 offers from £5.99 - £8.59
View price history by clicking the chart icon.
This Knightsbridge CU4101 4-gang 2-way light switch is designed for modern homes seeking a clean, minimalist aesthetic with enhanced hygiene. It offers convenient control for multiple lighting circuits from a single location, featuring a softly rounded 7mm profile and anti-microbial properties. A potential caveat for some installations is the requirement for a minimum 25mm back box depth.
| Colour | White |
|---|---|
| Model Part Number | CU4101 |
| Brand | Knightsbridge |
The anti-microbial properties help to inhibit the growth of bacteria and other microbes on the switch surface, contributing to a more hygienic environment.
Yes, this switch is suitable for controlling LED lighting circuits, provided the total load does not exceed the 10A rating.
The terminal capacity is 2 x 1.0mm² or 2 x 1.5mm².
Yes, a minimum back box depth of 25mm is required for installation.
'4 Gang' means there are four individual switches on the plate. '2 Way' means each switch can control a light from two different locations (e.g., top and bottom of stairs).
No, this switch is IP20 rated and intended for indoor use only in dry locations. It is not suitable for bathrooms or areas with high moisture exposure.
Wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive materials to protect the finish and anti-microbial coating.
Verify that power is supplied to the circuit and that the wiring connections are secure and correct for a 2-way switching setup.
Check for loose wire connections at the switch terminals or within the back box. Ensure the minimum back box depth of 25mm is met to avoid strain on connections.
Ensure the mounting screws are tightened securely to the back box. If the back box itself is loose, it may need to be refitted.
Setup: This switch requires a minimum back box depth of 25mm. Ensure the power supply to the circuit is turned off at the main consumer unit before installation. Connect the appropriate wires to the terminals, observing correct polarity. The terminal capacity is 2 x 1.0mm² or 2 x 1.5mm².
Compatibility: Designed for UK electrical systems and complies with BS EN 60669. It is suitable for standard domestic lighting circuits.
Care: Clean the switch with a soft, damp cloth. Avoid abrasive cleaners or solvents, which could damage the anti-microbial coating or the plastic finish. Ensure the switch remains dry.
