1m Armoured LC/APC XGS-PON OS2 Single Mode Fibre Optic Cable. This 1-metre OS2 Single Mode patch c...1m Armoured LC/APC XGS-PON OS2 Single Mode Fibre Optic Cable. This 1-metre OS2 Single Mode patch cord is built for maximum durability and compatibility with the latest high-speed fibre networks. It features a robust armoured construction, with a stainless steel layer under the jacket, to protect the delicate fibre core from crushing, impacts, and rodent damage. Specifically designed for modern FTTx (Fiber to the Home) services, this cable is fully compatible with XGS-PON networks. It is the perfect solution for extending existing fibre runs, such as those from Virgin Media, allowing you to safely and easily relocate your router or modem to a more convenient location without signal loss. Key Features: Armoured Construction: A built-in stainless steel layer provides superior protection against crushing, bending, and rodent damage. XGS-PON Compatible: Guaranteed to work with high-speed XGS-PON, GPON, and other FTTx/FTTP services. High-Performance Connectors: Fitted with LC/APC (Angled Physical Contact) connectors for the lowest possible back reflection ($<-60$dB). Fibre Type: OS2 Single Mode (9/125 $\mu$m), the standard for high-speed, long-distance data transmission. Simplex Cable: Contains a single strand of fibre, as required by most residential and commercial fibre services. Robust 3mm Jacket: The 3mm outer diameter provides extra durability and makes the cable easier to handle. Length: 1 metre, perfect for patching from a wall outlet to a router or for short-distance extensions. Visual Identifier: Features green LC connectors, clearly identifying it as an APC cable required by most service providers. Applications: Home Use Router Relocation: The perfect cable for extending your Virgin Media or other FTTP service point to move your router. Damage Protection: Ideal for running fibre through areas with risk of damage (e.g., attics, garages, or near pests). XGS-PON Upgrades: Future-proof your home network for multi-gigabit internet speeds. Connecting to any F.
This 1-metre Kenable armoured OS2 single-mode fibre optic cable is designed for high-speed FTTx networks, particularly XGS-PON, offering enhanced durability for home or office use. Its key benefit is robust protection against physical damage, making it ideal for extending fibre connections in less-than-ideal environments. A potential caveat is its specific connector type (LC/APC) which must match your existing equipment.
All features
Series
OS2 Single Mode
Model Part Number
013497
Brand
kenable
Extended Product Information
FAQs
What does OS2 Single Mode mean?
OS2 refers to the type of single-mode optical fibre. Single-mode fibre has a small core, allowing light to travel in a single path, which is ideal for high bandwidth and long-distance transmissions. OS2 is the modern standard for this type of fibre.
Is this cable suitable for Virgin Media connections?
Yes, this cable is specifically mentioned as compatible with services like Virgin Media's FTTP and is designed for XGS-PON, which is relevant for high-speed fibre internet.
What is the difference between LC/PC and LC/APC connectors?
LC/APC connectors have an angled end-face (8 degrees) to reflect light back into the core at an angle, significantly reducing back reflection. LC/PC connectors have a flat end-face. APC connectors are often required for higher-speed networks and specific ISP equipment to minimize signal loss and interference.
Can I use this cable for longer distances than 1 metre?
While the cable itself supports long-distance transmission due to its OS2 single-mode nature, this specific product is only 1 metre long. For longer runs, you would need a longer cable of the same type.
How do I clean the LC/APC connectors?
Use a specialized fibre optic cleaning tool, such as a one-click cleaner or lint-free wipes with an appropriate cleaning solvent. Avoid touching the end-face with your fingers.
Will the armoured construction make the cable hard to install?
The armoured layer adds durability but also some stiffness. However, with a 3mm jacket and a 1-metre length, it should still be manageable for typical installations where routing requires some protection.
What does XGS-PON compatibility mean for me?
XGS-PON (10 Gigabit Symmetrical Passive Optical Network) is a newer standard for fibre internet providing very high speeds, often multi-gigabit. This cable ensures your connection hardware is ready for these advanced speeds.
Troubleshooting
No internet connection after installation
Verify both ends of the fibre cable are securely clicked into the correct ports on your router/ONT and wall socket. Check that the connectors are clean and free from dust. Ensure the cable is compatible with your service provider's requirements.
Intermittent connection or slow speeds
Inspect the cable for any visible damage. Ensure the LC/APC connectors are properly seated and clean. Try a different port if available on your equipment. If the issue persists, the cable may be faulty or there might be an external network problem.
Cable feels stiff or difficult to route
While armoured, the cable still has bending radius limitations. Avoid sharp bends. Gently guide the cable into position, utilizing its 1-metre length to find a suitable path.
Pros and Cons
Pros
Exceptional durability due to armoured construction
Optimized for modern high-speed fibre networks like XGS-PON
Low signal loss with high-quality LC/APC connectors
Suitable for extending existing fibre installations safely
Clear visual identification of connector type
Cons
Specific connector type (LC/APC) may not be universally compatible
1-metre length limits its use for longer extensions
Armoured design might make it slightly stiffer than non-armoured cables
Setup, Compatibility & Care
Setup:
Ensure both the source and destination ports are clean and free of dust.
Identify the LC/APC connectors on the cable (they are typically green).
Align the connector with the corresponding port on your equipment (e.g., router, ONT, wall socket).
Gently push the connector in until it clicks securely into place.
Repeat for the other end of the cable.
Compatibility:
This cable is designed for OS2 Single Mode Fibre optic systems.
It features LC/APC connectors, which are standard for many FTTx, GPON, and XGS-PON services. Always verify that your existing equipment uses LC/APC (or compatible) connectors.
The green colour of the LC connectors indicates the APC (Angled Physical Contact) finish, which is essential for some network types and minimizes back reflection.
Care:
Avoid excessive bending or kinking of the cable, even with its armoured protection.
Keep connector end-faces clean. Use appropriate fibre optic cleaning tools if necessary.
Protect the cable from extreme temperatures and direct sunlight for prolonged periods.
Store the cable loosely coiled when not in use, avoiding tight wraps.
OnBuy.com£12.48Visit shop 
B&Q£13.77Visit shop 
