Best current price£12.99from eBay
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop 5-Way Brass Pump Fittings Connector Pressure Check Vessels Gauges 1"" x 1/4"" BSP
Visit shop
B&Q£22.99Visit shop B&Q - 5-Way Brass Pump Fittings Connector Pressure Check Vessels Gauges 1" X 1/4" Bsp
Visit shop2 offers from £12.99 - £22.99
View price history by clicking the chart icon.
This PLUMBING4HOME 5-Way Brass Pump Fittings Connector is ideal for plumbing professionals and DIY enthusiasts looking to consolidate multiple connections for pressure vessels, switches, and gauges on pressurized water systems. Its primary benefit is creating a compact, organized, and reliable manifold for essential system components, simplifying installation. A minor consideration is the specific BSP thread sizing, requiring accurate measurement for compatible fittings.
| Model Part Number | 5-Way Brass Pump Fittings Connector |
|---|---|
| Brand | PLUMBING4HOME |
This fitting uses BSP (British Standard Pipe) threads. It has 1" Female BSP, 1" Male BSP, and 1/4" Female BSP ports.
The maximum working pressure is 1.0MPa (10 bar), and the maximum working temperature is 90°C.
No, this fitting uses BSP threads, which are different from NPT (National Pipe Taper) threads. You will need appropriate adapters if connecting to NPT systems.
It provides five connection points: three 1" BSP ports and two 1/4" BSP ports.
Typically, it's used to connect a pressure vessel (tank), a pressure switch, and a pressure gauge to a pump system.
The fitting is made from durable brass.
The overall length of the fitting is 70mm.
Ensure pipe thread sealant or PTFE tape was used on all male threads. Check that all connections are tightened appropriately. If the leak persists, inspect threads for damage and re-apply sealant before retightening.
Verify that the connecting component has a 1/4" Female BSP thread. Ensure no debris is present in the fitting's port.
This is uncommon with brass in standard water systems. Ensure the water quality is within normal parameters. Clean gently with a mild brass cleaner if necessary.
Setup: Ensure all system components (pump, pressure tank, pressure switch, gauge) are powered off and the system is de-pressurized before installation. Apply pipe thread sealant or PTFE tape to male threads before inserting into the appropriate female ports. Tighten fittings securely but avoid over-tightening, which can damage threads or the fitting.
Compatibility: This fitting uses BSP (British Standard Pipe) threads. Verify that all connecting pipes, gauges, and switches have compatible BSP threads. It is suitable for cold and hot water systems up to 90°C and 10 bar (1.0MPa) pressure.
Care: Clean the exterior of the fitting with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the brass. Periodically check all connections for leaks, especially after initial setup or system pressure changes.
