Syntol Hammer Grease Cartridges - 3X400G

Yes, the semi-synthetic formula is designed for stability under high heat, making it suitable for demanding hydraulic applications, though standard cold-weather startup procedures for heavy machinery should still be followed.

While it is a high-quality lubricant, it is specifically formulated for the high-impact needs of chisels. It may not provide the correct performance profile for bearings, gears, or chassis lubrication.

NLGI No2 refers to the consistency of the grease. It is a 'soft' grease, which is the industry standard for most grease gun applications as it is thick enough to stay in place but fluid enough to be pumped through standard grease fittings.

Always follow the maintenance schedule provided by your specific hammer manufacturer, as lubrication frequency depends on the intensity of use and environmental conditions.

Syntol Hammer Grease is formulated with oxidation inhibitors that provide a degree of protection against moisture, but it is primarily designed for high-pressure friction protection.

Ensure the cartridge was properly opened by removing the ring pull and end cap. Check if the grease gun has an air pocket and prime the gun to remove trapped air.

Verify that all old, hardened grease was purged from the bushing before applying the new Syntol grease. Increase the frequency of lubrication during extreme heat conditions.

This is a sign of over-application. Reduce the amount of grease used during each service interval and follow manufacturer specifications exactly.