Simply Brake Caliper Spray - Yellow - 400ml - SP016

One 400ml can is usually sufficient for a set of four calipers, depending on the size and number of coats applied.

It is recommended, but not essential. Removing the calipers allows for better access and a more thorough paint job. If painting them on the car, mask off surrounding areas.

Thorough cleaning, removal of rust, sanding, and degreasing are essential for proper paint adhesion and a professional finish.

Drying times vary. Check the product label for specific instructions, but generally, allow several hours for the paint to dry to the touch and a full 24 hours for complete curing.

Yes, the paint is designed to be resistant to brake fluid and other chemicals.

While designed for calipers, you could use it on other high-temperature parts, but ensure proper surface preparation for any application.

Work in a well-ventilated area. Wear a respirator or mask to avoid inhaling paint fumes. Wear gloves and eye protection.

Apply thinner coats and ensure you are holding the can the correct distance from the surface. Avoid spraying too much paint in one area.

Ensure the surface is properly cleaned and degreased before application. Lightly sand the surface to improve adhesion.

Ensure the paint is fully cured before exposure to the elements and follow the manufacturer's recommended drying times.