Best current price£17.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£17.99Visit shop B&Q - Fd30/60 Intumescent Fire And Smoke Door Seal Strips5 Pack1050mm X 10mm X 4mmSeals To Reduce Smoke Spread (Black)
Visit shop6 offers from £17.99 - £18.99
View price history by clicking the chart icon.
This guide is for homeowners and builders seeking certified fire and smoke protection for standard internal fire doors. The Exitex Intumescent Fire and Smoke Door Seal Strips offer rapid fire response and smoke reduction with an easy-to-fit self-adhesive backing. A potential caveat is that the pack contains strips of a specific size, so ensure they are suitable for your door dimensions.
| Model Part Number | 1.31.0320.1050 |
|---|---|
| Brand | Exitex |
No, these Exitex intumescent fire and smoke door seal strips are specifically designed and tested for use on internal fire door assemblies only.
The seals are CERTIFIRE approved and independently fire tested for 30 and 60 minutes to BS 476 Part 22 and BS EN 1634-1 standards.
Each strip measures 105cm x 1.5cm x 0.4cm. Measure the gap between your door and frame. This product is best suited for standard internal fire doors where this gap size is appropriate.
Painting over the seals is not recommended as it may affect their performance and adhesion. The white color is designed to blend with most internal door finishes.
Each pack contains five white strips.
The brush pile integrated into the seal is designed to help reduce smoke infiltration through the door gap and has been tested to BS EN 1634-3.
With proper installation on a clean, dry surface, the self-adhesive backing should provide a secure hold for the lifespan of the product under normal conditions. Avoid excessive moisture or physical stress on the seal.
Ensure the surface is thoroughly cleaned and dried before application. Remove any residual dust, grease, or old adhesive. Apply firm, consistent pressure along the entire length of the seal during installation.
The seal may be too thick for the existing gap, or it may have been installed incorrectly. Check for obstructions and ensure the seal is not protruding excessively. If necessary, consider using a thinner seal or adjusting door/frame alignment.
This can happen if the surface was not adequately prepared or if there has been excessive moisture. Re-adhere the peeling section using a suitable, fire-rated adhesive, or replace the entire strip if significant detachment has occurred.
Ensure the seal is correctly fitted along the entire perimeter of the door, including the top and sides. Check for any unsealed gaps or damage to the seal. For significant smoke issues, consider supplementary smoke seals or a different product designed for larger gaps.
Setup:
Compatibility:
Care:
