Vacuum Cleaner Filter Bag - SPARES2GO - WD2, WD3

This SPARES2GO filter bag and foam filter set is compatible with Karcher WD2 and WD3 series wet and dry vacuum cleaners.

No, the textile filter bag is designed for dry debris collection and should not be washed. It should be emptied and replaced when full or dirty.

The foam filter should be cleaned regularly as per your Karcher vacuum's manual and replaced when it shows signs of wear, damage, or reduced filtration effectiveness, typically after several cleaning cycles.

You should replace the filter bag when it is full, visibly dirty, or if you notice a significant decrease in suction power. It is recommended to replace it before it becomes completely full to maintain optimal performance.

The textile bag is primarily for dry use. While the foam filter can assist with some moisture, for full wet vacuuming, the bag should typically be removed, and only the foam filter (if suitable for wet use as per Karcher instructions) should be in place.

Yes, this set includes both the main textile debris bag and a foam filter, providing a two-stage filtration system for general dry vacuuming tasks.

Ensure the new textile bag is correctly seated and not blocking the intake. Check that the foam filter is properly installed and not obstructed. Verify that there are no blockages in the hose or wand.

Check that the textile bag is fully sealed and has not torn. Ensure the foam filter is in place and undamaged. Confirm that the vacuum cleaner housing is properly closed and sealed.

Avoid overfilling the bag. Ensure sharp objects are not placed directly into the bag without being contained. Check if the filter bag is compatible with the material being vacuumed (e.g., not intended for very hot ashes or large sharp debris).