Best current price£103.10from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£103.10Visit shop Clarke 7120400 Ecp15a1 1.5 Electric Centrifugal Pump (230V)
Visit shop
B&Q£114.92Visit shop B&Q - Clarke Ecp15A1 1.5" Electric Centrifugal Pump (230V)
Visit shop2 offers from £103.10 - £114.92
View price history by clicking the chart icon.
The Clarke International Electric Centrifugal Pump (ECP15A1) is designed for users needing robust, high-volume water transfer for domestic, industrial, and agricultural tasks. Its key benefit is a powerful 811W motor delivering up to 239 litres per minute. A potential caveat is its need for clean water to prevent damage and maintain optimal performance. This pump offers reliable performance for irrigation, tank filling, and general pumping duties.
| Model Part Number | 7120400 |
|---|---|
| Brand | Clarke International |
The Clarke ECP15A1 is designed exclusively for clean water. It should not be used with dirty water, water containing solids, or abrasive materials, as this can cause damage.
The pump has a maximum head of 14 metres, meaning it can lift water vertically to this height.
The pump features 1.5" BSP inlet and outlet connections. It comes supplied with two hose adaptors that facilitate quick connection to standard hoses.
While designed for reliable performance, continuous heavy-duty use should be monitored for overheating. Ensure adequate ventilation and allow for rest periods if operating under extreme conditions.
Regular checks for blockages at the inlet and ensuring clean water are the primary maintenance tasks. Store in a dry place when not in use.
Yes, like most centrifugal pumps, the ECP15A1 requires priming. You need to fill the inlet hose and the pump casing with water before the first use or after the pump has been run dry.
Check that the pump is correctly plugged into a functioning 230V power outlet. Ensure the power switch is in the 'on' position.
Verify the pump is primed with water. Check the inlet and outlet hoses for any kinks or blockages. Ensure the water source is sufficient and the pump is not running dry.
Check for overheating; allow the pump to cool down. Ensure the power supply is stable. Inspect for any internal blockages that might be causing the motor to strain.
Ensure the pump is on a stable surface. Check for air leaks in the inlet hose or fittings. Debris in the impeller could also cause noise; inspect and clean if necessary.
Setup: Connect your inlet and outlet hoses to the 1.5" BSP connections. Use the supplied hose adaptors for quick assembly. Ensure the pump is placed on a stable, dry surface. Prime the pump by filling the inlet hose and pump casing with water before starting to ensure efficient operation.
Compatibility: This pump is designed for 230V power supplies. It is compatible with standard 1.5" BSP threaded fittings and hoses. Ensure all connections are secure to prevent leaks.
Care: The ECP15A1 is intended for clean water applications only. Regularly check the inlet for debris and clean any blockages. Store the pump in a dry, protected area when not in use. Avoid running the pump dry, as this can cause damage to the motor and seals.
