Best current price£107.99from eBay
Shopping.co.uk recommended and popular offers
eBay£107.99Visit shop 12 x Indasa Grey One Pack High Build Acrylic Based Primer 500ml Aerosol
Visit shop2 offers from £107.99 - £119.94
View price history by clicking the chart icon.
The Indasa One Pack High Build Acrylic Primer is an ideal solution for automotive professionals and DIY enthusiasts looking to achieve a flawless, smooth surface before applying topcoats. This high-build aerosol effectively fills sanding marks and minor surface defects, significantly streamlining the refinishing process. While its fast-drying nature boosts productivity, users should ensure adequate workspace ventilation to manage aerosol fumes during application.
| Colour | Grey |
|---|---|
| Model Part Number | HB Acrylic Spray Gun Finish Adhesion 20 Mins x12 |
| Brand | Indasa |
While the primer is dry to the touch in 20 minutes, it is best to allow 30-60 minutes before light wet or dry sanding to ensure full curing of the film.
This primer is generally compatible with many surfaces, but for bare plastic, it is recommended to use a dedicated plastic adhesion promoter first.
It is compatible with most standard automotive 1K and 2K topcoats, but always perform a test patch if you are unsure of the chemistry.
Yes, light sanding of the substrate is essential to provide mechanical tooth for the primer to adhere properly.
It is strictly recommended to use this product in a well-ventilated area or a spray booth to prevent the inhalation of aerosols and solvents.
Remove the nozzle and soak it in a suitable solvent or replace it with a spare. Always clear the nozzle after every use by inverting the can.
You are likely holding the can too close to the surface or moving too slowly. Increase your distance and speed for a lighter, more controlled mist.
Ensure the substrate was sanded with the correct grit and thoroughly cleaned with a wax and grease remover before application.
Before application, ensure the substrate is clean, dry, and free from grease or wax by using a professional degreaser. Shake the aerosol can vigorously for at least two minutes after the mixing ball rattles to ensure the solids are properly suspended. Apply in a well-ventilated area at an ambient temperature of 15-25 degrees Celsius. When finished, invert the can and spray for a few seconds to clear the nozzle, preventing clogs for future use. Store the canister in a cool, dry place away from direct sunlight to maintain the integrity of the propellant and formula.
