Apico Motocross Rim Lock - 2.15"
Best current price£11.49from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£11.49Visit shop Apico Rim Lock Nylon 2.15"" WM3
Visit shopeBay£11.49Visit shop All Offers
2 offers from £11.49 - £14.49
View price history by clicking the chart icon.
Product Information
Full details
The Apico Motocross Rim Lock (2.15") is an essential component for off-road riders looking to prevent tyre slippage and protect their inner tubes during high-torque acceleration and heavy braking. Designed for motocross and enduro enthusiasts, this durable nylon lock provides a secure grip on the tyre bead, ensuring stability on the track or trail; however, users should ensure their rim width is compatible with the 2.15" sizing before installation to prevent improper fitment.
All features
| Model Part Number | RIML WM3 API |
|---|---|
| Brand | Apico |
Extended Product Information
FAQs
What does the 2.15 sizing mean?
The 2.15" size refers to the rim width the lock is designed to fit. You should check your motorcycle's rim specifications to ensure compatibility.
Can I use this on a tubeless setup?
No, this rim lock is specifically designed to protect inner tubes in tyres that require them.
Does this rim lock come with a bolt and nut?
Yes, the unit is a complete assembly including the necessary hardware for installation.
How often should I replace the rim lock?
Inspect for cracks or wear on the angular ridges during every tyre change. If the ridges appear smoothed down or the nylon body shows stress fractures, it should be replaced.
Will this work on the front and rear wheel?
It depends on your rim width. If both wheels utilize a 2.15" width, it can be used on either; check your manual for specific rim sizing.
Troubleshooting
Tyre bead not seating correctly
Loosen the rim lock nut slightly, ensure the bead is fully tucked underneath the lock ridges, then re-tighten.
Nut feels loose after riding
Vibration is common in off-road riding; check the tightness of the rim lock nut before each ride as part of your standard pre-ride inspection.
Difficulty installing the tyre over the lock
Ensure the rim lock nut is backed off as far as possible so the lock sits flush against the rim interior, creating maximum space for the tyre bead to pass over.
Pros and Cons
Pros
- Lightweight yet highly durable nylon material
- Prevents tyre slip during high-torque scenarios
- Protects inner tubes from abrasion and wear
- Easy to install on compatible rim widths
Cons
- Specific to 2.15" rim width requirements
- Requires careful tightening to avoid over-compression
- Not intended for non-tyred/tubeless wheel configurations
Setup, Compatibility & Care
To install the rim lock, ensure the inner tube is partially inflated to hold its shape during the tyre seating process. Place the rim lock through the designated hole in the rim, then seat the tyre bead over the lock. Tighten the nut on the exterior of the rim until the lock feels secure against the bead, but be careful not to overtighten, which could crack the nylon housing. Regularly check the nut tightness as part of your pre-ride maintenance routine, especially after heavy use. Always confirm your motorcycle rim width is 2.15" to ensure the component fits correctly within the rim channel.