JCP CONSTRUCTION PRODUCTS J-Fix Hammer-In Resin Capsules - M12 x 110 - Yellow - Box of 10

The primary advantage is the speed of installation. They can be hammered directly into the hole, allowing for immediate loading without waiting for resin to cure.

They are designed for use in concrete and masonry. Ensure the substrate is solid and suitable for load-bearing.

You will need a drill bit suitable for an M12 fixing, typically corresponding to the capsule's specifications. Always refer to the product packaging for precise drill bit size recommendations.

No, once a hammer-in resin capsule is struck and inserted, it cannot be removed and reused. It is designed for a single, permanent installation.

These are instant-load fixings. Once the capsule is properly hammered in, the fixing can typically be loaded immediately.

Each box contains 10 JCP J-Fix Hammer-In Resin Capsules.

Yes, they are made from durable materials suitable for construction and renovation tasks, implying suitability for exterior applications provided the base substrate is protected from excessive moisture.

Ensure the drilled hole is clean and of the correct diameter. Check for any obstructions within the hole. Use a hammer of appropriate weight for the task.

Verify that the hole was thoroughly cleaned before capsule insertion. Ensure the substrate is sound and not cracked or crumbling. The capsule must be fully hammered in.

These are hammer-in capsules and do not require a separate curing time like two-part chemical anchors. The holding power is achieved through mechanical expansion and resin displacement upon hammering. If poor performance is noted, refer to the 'Poor holding power' solution.