J-B Weld HighHeat Epoxy Putty Stick - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to repair components exposed to high temperatures using J-B Weld HighHeat Epoxy Putty Stick. It provides a durable, heat-resistant bond, perfect for automotive and industrial applications. However, proper surface preparation is critical for optimal results. This industrial-strength epoxy putty stick is designed to withstand extreme heat and offers a reliable solution for various repair needs.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 8297UK |
| Brand | J-B Weld |
Extended Product Information
FAQs
What is the maximum continuous temperature this product can withstand?
J-B Weld HighHeat can withstand continuous temperatures up to 450°F (232°C).
How long does it take for J-B Weld HighHeat to cure?
It sets in 1 hour and fully cures in 8 hours at room temperature.
Can I paint over J-B Weld HighHeat?
Yes, once fully cured, J-B Weld HighHeat can be drilled, tapped, machined, ground, filed, and painted.
Is J-B Weld HighHeat resistant to chemicals?
Yes, it is resistant to water, most chemicals, and heat.
What surfaces can J-B Weld HighHeat be used on?
It is suitable for use on metal, including steel and iron, and is commonly used for automotive and industrial repairs.
Can I use J-B Weld HighHeat on exhaust pipes?
Yes, it is ideal for repairing exhaust systems and other high-heat automotive components.
How should I store J-B Weld HighHeat?
Store in a cool, dry place. Ensure the package is tightly sealed.
What color is the cured J-B Weld HighHeat?
The cured color is machine grey.
Troubleshooting
Epoxy not hardening
Ensure that the product has been mixed thoroughly. Make sure the ambient temperature is within the recommended range. Check the product expiration date.
Poor adhesion
Thoroughly clean and prepare the surface. Roughen the surface with sandpaper or a wire brush to improve adhesion.
Cracking after curing
Avoid applying too much epoxy at once. Apply in layers if necessary. Ensure the application area is stable and not subject to movement during curing.
Pros and Cons
Pros
- Excellent for high-temperature applications.
- Provides a strong and durable bond.
- Fast setting time allows for quick repairs.
- Versatile and can be used on various materials.
- Easy to apply with no special tools needed.
- Resistant to water, chemicals, and heat.
Cons
- Requires proper surface preparation for optimal adhesion.
- Limited working time once mixed.
- May not be suitable for all types of materials.
- Color is limited to machine grey.
- Shrinkage may occur during curing, although minimal.
- Not intended for structural repairs.
Setup, Compatibility & Care
- Surface Preparation: Clean the surface thoroughly with a wire brush or sandpaper to remove rust, grease, and other contaminants. Ensure the surface is dry.
- Mixing: Cut off the required amount of J-B Weld HighHeat. Knead the putty stick until the color is consistent.
- Application: Apply the mixed putty to the area needing repair. Press firmly to ensure good contact with the surface.
- Curing: Allow the epoxy to set for 1 hour at room temperature and fully cure in 8 hours before drilling, tapping, machining, grinding, filing, or painting.
- Compatibility: J-B Weld HighHeat is compatible with materials commonly found in automotive and industrial applications.
- Care: Store the epoxy stick in a cool, dry place. Ensure the package is tightly sealed to prevent the epoxy from drying out.