Diall Pz Countersunk Hammer Fixing - (Dia)8mm - (L)120mm

Name: Diall Pz Countersunk Hammer Fixing - (Dia)8mm - (L)120mm
Brand: Diall
SKU: aaoiemrhxe
Price: 3.00 GBP
Availability: InStock

The Diall PZ Countersunk Hammer Fixing set (8mm x 120mm) in a pack of 10 is designed for secure an...

Best current price£3.00from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£3.00Visit shop

B&Q - Pz Countersunk Hammer Fixing (Dia)8mm (L)120mmPack Of 10

Visit shop

One Offer

1 offer from £3.00

View price history by clicking the chart icon.

B&QB&Q - Pz Countersunk Hammer Fixing (Dia)8mm (L)120mmPack Of 10

Free delivery in 1–3 days

£3.00

Visit shop

Product Information

Full details

This guide is for anyone using the Diall PZ Countersunk Hammer Fixing set for installations in solid walls and similar materials. The key benefit is a quick and secure fixing solution due to its hammer-in design. A point to note is that these fixings are best suited for through-type installations. This guide covers setup, best practices, and troubleshooting to help you get the most out of your Diall fixings.

All features

Brand	Diall

Extended Product Information

FAQs

What materials are these fixings suitable for?

They are suitable for solid walls, brick, concrete, and stone.

What size hole do I need to drill?

You need to drill an 8mm hole.

Can I use these fixings on plasterboard?

No, these fixings are not recommended for use on plasterboard or hollow walls.

How do I remove a Diall PZ Countersunk Hammer Fixing?

Removal is difficult. The best method is to cut off the head and try to pull the remaining part with pliers.

What is the maximum load these fixings can support?

Load capacity depends on the material, the diameter, and the depth of the hole. Always refer to manufacturer guidelines for specific load ratings.

What is the advantage of the countersunk head?

The countersunk head allows for a flush finish, improving the aesthetics of the installation.

How do I prevent corrosion?

Ensure the fixings are stored in a dry place. In areas prone to moisture, consider using corrosion-resistant fixings.

Troubleshooting

Fixing won't go in.

Ensure the hole is the correct size (8mm) and clean of debris. If the material is too hard, consider using a different fixing method or a more powerful drill.

Fixing feels loose after installation.

Ensure the fixing is fully inserted and the nylon sleeve is expanded. Check if the hole is the correct size. In some cases, a longer fixing may be needed for a more secure grip.

Pros and Cons

Pros

Quick installation due to the hammer-in design.
Secure anchoring in various solid materials.
Suitable for a range of applications, especially timber constructions.
The pre-fitted screw saves time.
Offers a flush and clean finish.

Cons

Primarily designed for through-type installations.
May not be suitable for all types of wall materials (e.g., hollow walls).
Requires a hammer for installation.
The nylon sleeve is subject to temperature changes.

Setup, Compatibility & Care

Preparation: Ensure the surface is clean and free from debris. Pre-drill a hole with the correct diameter (8mm) for the fixing.
Insertion: Insert the fixing through the item to be fixed and into the pre-drilled hole.
Installation: Using a hammer, drive the nail screw until the head is flush with the surface.
Compatibility: These fixings are compatible with solid walls, brick, concrete, and stone. Not recommended for hollow or fragile materials.
Care: Avoid over-tightening the fixing, as this can damage the material. Check for any signs of corrosion and replace if necessary.