Tetroseal Underbody Sealant has been specially formulated to protect vehicles against corrosion, r...Tetroseal Underbody Sealant has been specially formulated to protect vehicles against corrosion, rust, stones, salt and water, extending the vehicle life and helping to maintain value. Tetroseal is a technologically advanced, highly structured underbody sealing compound which is particularly resistant to sagging when applying and provides excellent sound deadening qualities. Suitable for use on Door sills, underwings, wheel arches, boot lids & engine bonnets. To completely seal the car against drumming, apply a coat inside the door panels and on the bare metal floor of the car. To remove Tetroseal Underbody Sealant from paintwork, wipe off immediately with white spirit. DIRECTIONS FOR USE: Ensure the surface to be treated is dry and free from old flaking underbody sealant, loose rust, dirt & grease. Mask off grease nipples, etc., with tape or newspaper. Apply Underbody Sealant with a 7cm brush all over the underside of the vehicle, leaving about a 2mm coating. After 2-3 hours, a second coat can be applied if desired.
B&Q - Waxoil Underseal Shutz Car Rustproof Clear Car Rust Proofing 5LFree delivery in 1–3 days£40.99Visit shop →
Product Information
Full details
This guide is for vehicle owners seeking to protect their cars from rust and corrosion using Tetroseal Underbody Sealant. The key benefit is long-lasting protection against environmental damage, extending the life of your vehicle. Keep in mind that proper surface preparation is crucial for optimal performance.
All features
Colour
White
Model Part Number
TSL501
Brand
Tetroseal
Extended Product Information
FAQs
What is Tetroseal Underbody Sealant used for?
It is used to protect vehicle underbodies from rust, corrosion, stone chips, and water damage.
Where can I apply Tetroseal Underbody Sealant?
It can be applied to door sills, underwings, wheel arches, boot lids, and engine bonnets.
How do I prepare the surface before application?
Ensure the surface is dry and free from old flaking sealant, rust, dirt, and grease. Mask off grease nipples.
How should I apply the sealant?
Apply with a 7cm brush, leaving about a 2mm coating.
Can I apply multiple coats?
Yes, a second coat can be applied after 2-3 hours.
How do I remove the sealant from paintwork?
Wipe off immediately with white spirit.
Is the sealant sound deadening?
Yes, it provides excellent sound deadening qualities.
Troubleshooting
Sealant is sagging after application.
Ensure the surface is properly prepared and free from contaminants. Apply in thin, even coats, and avoid excessive application in one area.
Sealant does not adhere properly.
Thoroughly clean the surface to remove all traces of rust, dirt, and grease. Use a suitable degreaser if necessary.
Difficulty removing sealant from paintwork.
Wipe off immediately with white spirit. If the sealant has dried, it may be more difficult to remove, and you may need to use a specialized solvent, but test on an inconspicuous area first.
Pros and Cons
Pros
Extends vehicle life by preventing rust and corrosion.
Provides protection against stone chips and road debris.
Offers sound deadening properties for a quieter ride.
Easy application with a brush.
Suitable for a wide range of vehicle areas.
Cons
Requires proper surface preparation for optimal adhesion.
Removal from paintwork requires immediate action with white spirit.
May require multiple coats for complete coverage.
Setup, Compatibility & Care
Preparation: Ensure the surface is dry and free from old flaking underbody sealant, loose rust, dirt, and grease. Mask off grease nipples with tape or newspaper.
Application: Apply with a 7cm brush all over the underside of the vehicle, leaving about a 2mm coating.
Multiple Coats: A second coat can be applied after 2-3 hours if desired.
Compatibility: Suitable for use on various vehicle components including door sills, underwings, wheel arches, boot lids, and engine bonnets.
Care: To remove Tetroseal Underbody Sealant from paintwork, wipe off immediately with white spirit.