Toupret Fine Finish Ready Mixed Finishing Plaster - 300G Tub - White

This plaster is suitable for interior walls and ceilings, including plasterboard, concrete, and existing painted surfaces.

Drying time depends on the thickness of the application and environmental conditions, but it generally dries quickly. Refer to the product label for specific drying times.

Yes, once the plaster is completely dry, you can paint over it with emulsion paints.

It is generally recommended to prime the surface before applying the plaster, especially if it is a porous surface or if you are applying the plaster over existing paint.

Store the remaining plaster in a cool, dry place with the tub tightly sealed to prevent it from drying out.

You will need a filling knife or a similar tool for applying the plaster and sandpaper for smoothing the surface after drying.

No, this plaster is specifically designed for interior use only.

This plaster is best suited for small repairs and touch-ups. For larger repairs, you may need a different type of plaster.

Ensure the surface is properly prepared, clean, and primed. If the surface is too smooth, lightly sand it to improve adhesion. Apply in thin layers.

Apply the plaster in thin coats. Ensure that each layer is completely dry before applying the next coat. Avoid applying too much plaster at once.

Use a clean filling knife and apply the plaster evenly. Lightly sand the surface after drying to remove any imperfections.

Ensure that the ambient temperature is not too high and avoid applying the plaster in direct sunlight. If necessary, you can lightly mist the surface with water before applying the plaster to slow the drying process.