Best current price£513.95from eBay
Shopping.co.uk recommended and popular offers
eBay£513.95Visit shop Trix DB BR193 008-0 Electric Locomotive IV (DCC-Sound) M25873 HO Gauge
Visit shop1 offer from £513.95
View price history by clicking the chart icon.
This Trix H0 electric locomotive model is for model railroad enthusiasts looking for a highly detailed and functional replica of the German Federal Railroad (DB) class 193 heavy freight locomotive from the 1970s. Its key benefit is the authentic appearance combined with DCC sound and light functions for an immersive experience. A minor caveat is its specific operating condition around 1976, which may limit its use in modern era layouts.
| Model Part Number | 25873 |
|---|---|
| Brand | TRIX H0 |
This model represents the German Federal Railroad (DB) class 193 heavy freight electric locomotive in its operating condition around 1976.
Yes, to utilize the full range of sound and light functions, a DCC (Digital Command Control) compatible controller is required.
This is a 1:87 scale model, commonly referred to as H0 scale.
While the model may run on analog DC power, its DCC sound and light functions will not be operational. It is designed primarily for DCC operation.
The sandboxes are a detail replicated from the full-size locomotive. They contained sand used to improve traction between the wheels and the rails during acceleration, especially in wet or slippery conditions.
Yes, a suitable goods wagon set is available in the H0 Maerklin range under article number 47371.
Use a soft, dry cloth for exterior cleaning. Avoid harsh chemicals. For wheel cleaning, a specialized track cleaning pad or a cotton swab with a mild contact cleaner can be used cautiously.
The Trix H0 model 25873 described here is typically a DC model designed for digital systems (DCC). The Maerklin H0 model 37873 is an AC model, designed for Märklin's proprietary digital system and traditional AC analog operation. They represent the same locomotive but are powered and controlled differently.
Ensure the track is clean and has good electrical conductivity. Verify that the DCC controller is powered on and the locomotive's address is correctly set. Check for any obstructions around the wheels or coupling rods.
Confirm that your DCC controller supports sound and light functions and that the locomotive's address is set to access these features. Check the CV (Configuration Variables) settings if your controller allows advanced programming. Ensure all digital switches for lights and sound are activated via your controller.
Clean the wheels and track thoroughly to ensure consistent electrical pickup. Lubricate the locomotive's drive mechanism according to manufacturer recommendations (if comfortable performing this task, otherwise seek professional help). Ensure there are no bent parts impeding movement.
Perform a DCC system reset or power cycle. Test the locomotive on a different section of track or layout known to work with other DCC-equipped models. Consult your DCC system's manual for troubleshooting decoder recognition.
Setup: This model is designed for use on DCC (Digital Command Control) layouts. Ensure your DCC system is compatible with standard NMRA DCC protocols. Place the locomotive on the track and ensure it is properly connected to your DCC controller. Consult your DCC system's manual for initial configuration and address setting, typically required to control sound and light functions independently.
Compatibility: The locomotive features NEM couplings, making it compatible with a wide range of H0 scale rolling stock from various manufacturers that also adhere to NEM standards. The AC version of this model is available under Maerklin H0 article number 37873.
Care: To maintain optimal performance, keep the track clean to ensure good electrical contact. Periodically inspect the wheels and pick-ups for dirt or debris. If cleaning is necessary, use a soft, dry cloth on the exterior. Avoid using harsh chemicals or abrasive materials. For internal maintenance or lubrication, refer to a specialized model railroad technician, as disassembly may require expertise.
