Shopping.co.uk

GTECH AirRam Vacuum Cleaner Drive Cog Shaft Spindle and Bearings - 10-GT-04

GTECH AirRam Vacuum Cleaner Drive Cog Shaft Spindle and Bearings - 10-GT-04

This upgraded metal drive cog shaft and bearing kit for Gtech AirRam vacuum cleaners is designed t...

Best current price£12.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£12.99Visit shop

Improved Metal Drive Cog Shaft Spindle Bearings for GTECH AirRam Vacuum Cleaner

Visit shop

All Offers

2 offers from £12.99 - £13.99

View price history by clicking the chart icon.

eBayImproved Metal Drive Cog Shaft Spindle Bearings for GTECH AirRam Vacuum Cleaner
Free delivery in 1–3 days
£12.99
Visit shop

Product Information

Full details

The bartyspares 10-GT-04 drive cog kit is designed for Gtech AirRam owners looking to resolve performance issues caused by worn-out plastic drive components. This kit provides a significant durability upgrade by replacing standard white cog parts with a robust metal drive cog shaft and bearing system, though it does require a moderate level of mechanical skill to install correctly.

All features

SeriesAirRam
Model Part Number10-GT-04
Brandbartyspares

Extended Product Information

FAQs

Is this an original Gtech part?

No, this is a high-quality compatible alternative part produced by bartyspares, designed to exceed the durability of the original plastic components.

Will this fix a vacuum that won't turn on?

No, this kit is specifically for drive-train issues where the motor may run, but the brush bar fails to spin.

Can I use standard oil if I run out of the provided grease?

We recommend only using the high-quality grease supplied with the kit, as standard household oils can attract dust and grit, leading to faster wear.

How long does installation take?

For an experienced user, installation typically takes 20 to 30 minutes.

Does the kit include the brush roll itself?

No, this kit includes only the internal drive cog, shaft, spindle, bearings, and grease.

Troubleshooting

Brush roll still not spinning after install

Verify that the drive cog is properly seated in the gear slot and that the belt is not stretched or broken.

Excessive noise after installation

Ensure that enough of the provided lubricant was applied to the spindle and bearings to reduce metal-on-metal friction.

Pros and Cons

Pros

  • Significantly higher durability than OEM plastic parts
  • Comprehensive kit includes all necessary hardware and lubricants
  • Cost-effective solution to restore suction and brush performance
  • Engineered for precise fitment in supported AirRam series

Cons

  • Requires disassembly of the vacuum cleaner head
  • Not suitable for users uncomfortable with basic mechanical repairs
  • Requires careful alignment during installation for optimal results

Setup, Compatibility & Care

This kit is compatible with the following Gtech AirRam models: Ar01, Ar02, Ar03, Ar05, and Dm001. To ensure a successful installation, you will need basic tools such as a screwdriver set to open the brush roll housing.

  1. Ensure the vacuum is powered off and disconnected from any power source.
  2. Carefully open the head unit to expose the drive assembly.
  3. Remove the worn plastic components, taking note of the order of parts.
  4. Clean the housing area of any residual debris or old, dried-out grease.
  5. Install the new metal shaft and spindle, ensuring you apply the included grease to all contact points.
  6. Reassemble the housing, checking that the brush roll turns freely by hand before switching on the power.

Regular maintenance involves checking the brush roll for hair wrap, which puts unnecessary strain on the drive cog.

Price History

DatePrice
Visit shop