Bontrager Rapid Drive 108 Free Hub Pawls - 148mm Boost

Upgrade or refresh your Bontrager wheels with these Rapid Drive 108 Free Hub Pawls. Sold in packs ...

Best current price£19.99from Team Cycles

All Offers

2 offers from £19.99

View price history by clicking the chart icon.

Team CyclesBontrager Unisex Black 108 148Mm Boost Pawls 3 Pack Silver
£4.99 delivery
£19.99
Visit shop
TredzBontrager Silver Rapid Drive 108 Free Hub Pawls Size 3
£2.95 delivery
£19.99
Visit shop

Product Information

Full details

The Bontrager Rapid Drive 108 Free Hub Pawls are essential replacement or upgrade components designed for cyclists using Bontrager Rapid Drive hub systems. These pawls are ideal for riders looking to maintain or tune their hub engagement for better power transfer on the trail. A key benefit is the modular engagement capability, allowing for either 54-tooth or 108-tooth engagement, though users should be aware that compatible springs are not included and must be purchased separately.

All features

Model Part Number552414
BrandBontrager

Extended Product Information

FAQs

Are the springs included in the pack?

No, the springs are sold separately.

Can I use these on a 142mm hub?

These specific pawls are designed for 148mm Boost spacing, though they may fit other Rapid Drive 108 shells depending on the specific wheel model.

What is the difference between using 3 and 6 pawls?

Using 3 pawls results in 54-tooth engagement, while using 6 pawls results in 108-tooth engagement.

How often should I service my freehub?

It is recommended to inspect and clean your freehub every 50-100 riding hours, or more frequently in muddy or wet conditions.

What kind of grease should I use?

Use only a light, freehub-specific oil or grease approved by Bontrager; avoid thick automotive or bearing greases.

Troubleshooting

Pawls are not engaging properly

Check that the springs are seated correctly and that you are using the correct light-viscosity lubricant.

Hub feels 'sticky' or draggy

You may have used too much or too thick of a grease; clean the assembly and re-apply a thinner pawl-specific lubricant.

Skipping under load

Ensure all pawls are intact and that the engagement teeth inside the hub shell are not damaged or rounded.

Pros and Cons

Pros

  • Allows for customizable engagement levels
  • Restores snappy hub engagement to worn systems
  • Genuine Bontrager replacement parts ensure compatibility
  • Easy to install during routine hub maintenance

Cons

  • Springs must be purchased as a separate item
  • Requires specific hub grease for proper installation
  • Not compatible with non-Rapid Drive hub designs

Setup, Compatibility & Care

To install these pawls, first remove the freehub body from your 148mm Boost rear hub. Clean the pawl pockets thoroughly with a degreaser to remove old, contaminated grease. Apply a light, specific freehub pawl lubricant—avoid heavy greases that can cause the pawls to stick. Insert your separately purchased springs into the seats, then carefully align the new pawls. Before reassembly, check that all pawls snap back freely when depressed. Ensure the freehub seal is clean and properly seated to prevent dirt ingress, which is the primary cause of pawl failure.

Similar items

Price History

DatePrice
Visit shop