Yasuni Sticker - 170x38 mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Yasuni Sticker (170x38 mm) is designed for motorcycle enthusiasts and hobbyists who want to personalize their gear or vehicle with authentic branding. It offers a quick, high-quality aesthetic upgrade that adheres well to various surfaces, though it is best suited for smooth, clean areas to ensure the adhesive bond remains intact over time.
All features
| Model Part Number | YASSTICKER5 |
|---|---|
| Brand | Yasuni |
Extended Product Information
FAQs
Can I use this sticker on textured plastic?
No, this sticker is designed for smooth, flat surfaces. It will not adhere well to heavily textured or porous plastic.
Is the sticker weather-resistant?
Yes, it is designed to be durable for external use on motorcycles and equipment.
What is the exact size of the sticker?
The dimensions are 170 mm in length by 38 mm in height.
Can I remove the sticker if I change my mind?
Yes, it can be removed, though you may need to use a heat gun on low or a mild adhesive remover to clean off any remaining residue.
How do I prepare the surface?
Clean the surface thoroughly with soap and water, then wipe it down with isopropyl alcohol to ensure no oils or waxes remain.
Troubleshooting
Sticker edges peeling shortly after application
The surface was likely not clean enough; remove, clean the area with alcohol, and ensure the surface is completely dry before re-applying a new sticker.
Air bubbles trapped under the sticker
Use a soft plastic squeegee or a microfiber cloth to gently push the air toward the nearest edge.
Pros and Cons
Pros
- High-quality authentic design
- Easy and quick installation
- Versatile size for various applications
- Durable finish on smooth surfaces
Cons
- Only suitable for smooth surfaces
- Size may be too large for small components
- Requires proper surface preparation for long-term adhesion
Setup, Compatibility & Care
For the best results, ensure the target surface is thoroughly cleaned with isopropyl alcohol to remove grease, wax, or dust before application. Peel the backing away slowly, position the sticker carefully, and press firmly from the center outward to eliminate air bubbles. To maintain the sticker's appearance, avoid using harsh chemical solvents or high-pressure washers directly on the decal during routine bike maintenance.