Best current price£10.28from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.28Visit shop B&Q - ChemtronicsSoder-Wick No Clean Desoldering Braid Green Label 2.0mm X 1.5M
Visit shop2 offers from £10.28
View price history by clicking the chart icon.
The Chemtronics Soder-Wick No Clean Desoldering Braid is designed for electronics technicians and hobbyists who require efficient, reliable solder removal from printed circuit boards. Its key benefit is a patented, non-corrosive, halide-free flux that significantly accelerates desoldering time while leaving the board residue-free. While it offers superior speed and precision, users should note the specific 1.9mm width is optimized for medium-sized pads and may require different widths for exceptionally small or large solder joints.
| Model Part Number | 60-3-5 |
|---|---|
| Brand | Chemtronics |
No, it features a no-clean flux formula that is non-corrosive and does not need to be removed.
Yes, it is packaged in static-dissipative bobbins to minimize the risk of ESD damage.
This product (80-3-10) is 1.9mm wide.
Yes, the high thermal conductivity of the copper braid makes it effective for both leaded and lead-free solder alloys.
This is likely oxidation caused by exposure to air. Keep the braid stored in its original packaging to maintain its effectiveness.
Ensure the soldering iron is at the correct temperature and that the braid is not oxidized. If it is dull or dark in color, trim the end of the braid.
Apply a small amount of flux to the joint first or use a wider braid if the joint is too large for the 1.9mm width.
Do not pull on the braid while the solder is cooling. Wait until the solder has fully solidified or re-heat slightly before lifting.
To ensure optimal performance, keep the braid stored in its original static-dissipative bobbin when not in use, as high humidity and moisture in the air can cause the copper to oxidize, which reduces wicking efficiency. Ensure your soldering iron tip is clean and tinned before use to facilitate the best heat transfer to the braid. The 1.9mm width is highly compatible with standard through-hole components, DPAK packages, and medium-density SMD pads. For cleaning, avoid using harsh chemicals; if the board surface must be cleaned for cosmetic reasons, a light isopropyl alcohol wash is sufficient, though the flux is designed to be left on the board safely.
