Shimano Spares SL-M6000 right hand base cover fixing screw unit
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for Shimano SL-M6000 shifter owners needing to replace a specific component. The key benefit is restoring the proper function and security of the right-hand shifter base cover. A potential caveat is that this is a very specific part, requiring precise identification to ensure compatibility.
All features
| Model Part Number | PL-Y0CR98070-4524667726609 |
|---|---|
| Brand | Shimano Spares |
Extended Product Information
FAQs
Is this screw compatible with other Shimano shifter models?
No, this specific screw unit is designed exclusively for the Shimano SL-M6000 right-hand shifter.
What tools are needed to install this screw?
Typically, a small Phillips head screwdriver or a compatible hex wrench, depending on the screw head type, is required. Ensure the tool fits snugly to avoid stripping.
Can I use a non-genuine screw?
While possible, using a non-genuine screw is not recommended. Genuine parts ensure proper fit, material strength, and long-term reliability, preventing potential damage to your shifter.
How do I know if I need to replace this screw?
You need to replace this screw if it is lost, stripped, cross-threaded, or if the shifter's right-hand base cover is loose or does not secure properly.
Does this part come with multiple screws?
This product is a single fixing screw unit. If multiple screws are required for your repair, you will need to purchase them separately.
Where is the serial number or model number of my shifter located?
The model name (e.g., SL-M6000) is usually printed on the shifter body itself, often on the underside or side.
Troubleshooting
Screw does not thread properly
Ensure you are using the correct screw for the SL-M6000 right-hand shifter and that the threads in the shifter body are clean and undamaged. Do not force the screw.
Base cover still loose after tightening
Verify the base cover is seated correctly and that no internal components are obstructing a flush fit. Check if the original screw hole is damaged, which may require professional assessment.
Shifter performance affected
This screw primarily secures the cover. If performance issues persist after replacement, the problem likely lies with other internal shifter components, not the screw itself.
Pros and Cons
Pros
- Guaranteed compatibility with Shimano SL-M6000 shifters.
- Maintains original shifter integrity and performance.
- Durable materials ensure a long-lasting repair.
- Genuine part eliminates guesswork in sourcing replacements.
Cons
- Specific to only one shifter model (SL-M6000).
- Only one screw is included, potentially requiring multiple purchases if more are needed.
- Requires basic mechanical knowledge for installation.
Setup, Compatibility & Care
Compatibility: This part is exclusively designed for the Shimano SL-M6000 right-hand shifter. Verify your shifter model before purchasing.
Setup:
- Ensure the shifter is clean and free from debris.
- Position the right-hand base cover correctly onto the shifter body.
- Insert the fixing screw unit into the designated threaded hole.
- Tighten the screw firmly but avoid over-tightening, which could strip the threads or damage the shifter body.
Care:
As a small metal component, the screw itself requires minimal care. The primary focus should be on maintaining the cleanliness of the shifter assembly it secures. Periodically check that the screw remains tight, especially after rough rides. If the screw becomes corroded over time (unlikely with genuine parts), replacement is recommended.