Thermopanel Curved Tile Backer Board - 20mm - (1250 X 600mm)
Best current price£22.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£22.99Visit shop B&Q - 20mm Curved Tile Backer Board (1250 X 600mm)
Visit shopB&Q£22.99Visit shop All Offers
5 offers from £22.99 - £140.99
View price history by clicking the chart icon.
B&Q - Tile Backer Board1250 X 600 X 6mmPack Of 10Free delivery in 1–3 days£97.99Visit shop →
B&Q - Tile Backer Board1250 X 600 X 10mmPack Of 10Free delivery in 1–3 days£104.99Visit shop →
B&Q - Tile Backer Board1250 X 600 X 12mmPack Of 10Free delivery in 1–3 days£133.99Visit shop →
B&Q - Tile Backer Board1250 X 600 X 15mmPack Of 10Free delivery in 1–3 days£140.99Visit shop →
Product Information
Full details
This guide is for anyone looking to create curved walls, bathroom panels, or custom features in wet areas using the Thermopanel 20mm Curved Tile Backer Board. The key benefit is the ability to easily create curved surfaces with excellent tile adhesion and waterproofing. Be aware that the minimum curved radius is 270mm, so consider your design carefully. This guide covers setup, usage, and troubleshooting for the Thermopanel Curved Tile Backer Board.
All features
| Brand | Thermopanel |
|---|
Extended Product Information
FAQs
What is the minimum curved radius?
The minimum curved radius is 270mm.
Can I use this board in a shower?
Yes, it is waterproof and ideal for shower installations.
What tools do I need to cut the board?
A utility knife is sufficient for cutting and shaping the boards.
What type of adhesive should I use?
Use a flexible tile adhesive suitable for wet areas.
Is the board pre-primed?
No, the board does not require priming. It is ready for tiling.
How do I seal the joints?
Use a waterproof sealant designed for wet areas.
What are the dimensions of each board?
Each board measures 1250 x 600mm.
Can I use this board for flooring?
While primarily for walls, it can be used for flooring in certain applications, provided the subfloor is properly prepared.
Troubleshooting
Board not adhering properly.
Ensure the surface is clean and use the correct adhesive for the substrate and tile type. Check that the adhesive is within its expiration date.
Difficulty in cutting the board.
Use a sharp utility knife and score the board multiple times before snapping it. Ensure a stable cutting surface.
Water leaking through the installation.
Check all joints and edges, re-seal any areas where water could penetrate. Ensure proper waterproofing techniques are followed during installation.
Tiles are cracking.
Ensure the substrate is stable and use a flexible tile adhesive. Allow adequate time for the adhesive and grout to cure before use.
Board is not bending to the desired radius.
Ensure the radius is not less than 270mm. Make relief cuts on the back of the board if necessary to achieve a tighter curve.
Pros and Cons
Pros
- Easy to create curved designs.
- Waterproof and suitable for wet areas.
- Easy to cut and shape with a knife.
- Provides excellent tile adhesion.
- Offers good insulation properties.
- Lightweight and easy to handle.
Cons
- Minimum curved radius of 270mm limits design flexibility.
- Requires careful measurement and planning.
- May require additional support for complex curves.
- Specific installation techniques are needed for optimal performance.
- 20mm thickness may not be suitable for all applications.
- Requires appropriate adhesive and sealing for a watertight finish.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, level, and free of loose debris. Measure and plan the curved design.
- Cutting: Use a utility knife to cut the boards to the required shape. Multiple passes may be needed.
- Installation: Secure the boards to the substrate using appropriate adhesive and mechanical fixings. Ensure all joints are properly sealed with a waterproof sealant.
- Tiling: Use a flexible tile adhesive suitable for wet areas. Follow the adhesive manufacturer's instructions for application.
- Grouting: Use a waterproof grout, and allow it to cure completely before exposing it to water.
- Compatibility: Compatible with most tile adhesives and grouts. Always check the manufacturer's recommendations.
- Care: Clean with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the surface.