Shimano Tourney TX51 Front Derailleur - 27117

The Shimano Tourney TX51 is a reliable and versatile front derailleur designed for cycling efficie...

Best current price£15.99from OnBuy.com

One Offer

1 offer from £15.99

View price history by clicking the chart icon.

OnBuy.comShimano Tourney Ty510 6/7-Speed Triple Top-Swing Dual-Pull Front Derailleur
Free delivery in 1–3 days
£15.99
Visit shop

Product Information

Full details

The Shimano Tourney TX51 front derailleur is an excellent choice for recreational cyclists and commuters looking for a dependable, cost-effective upgrade to their drivetrain. It offers precise shifting performance for 6 and 7-speed systems, though it is not compatible with modern 9, 10, or 11-speed setups. Featuring a versatile multi-fit design and dual-pull cable routing, it provides a straightforward path to improved gear indexing for entry-level mountain and hybrid bikes.

All features

Model Part Number27117
BrandShimano

Extended Product Information

FAQs

Will this work on an 8-speed bike?

No, the TX51 is specifically optimized for 6 and 7-speed drivetrain systems.

Does this derailleur support both top and bottom pull cable routing?

Yes, it is a dual-pull derailleur designed to accommodate both routing styles.

What is the maximum chainring size it can handle?

It is designed to support a 42-48T chainring setup.

How do I know if it fits my seat tube?

The TX51 includes mounting hardware compatible with 31.8mm and 34.9mm seat tubes.

Is special maintenance required?

Keep the pivots clean and lubricated. Periodically check that the mounting bolts remain tight.

Troubleshooting

Chain rubbing against the derailleur cage

Adjust the H or L limit screws to center the cage, or increase cable tension using the barrel adjuster.

Difficulty shifting into the large chainring

Ensure the derailleur cage is parallel to the chainrings and increase cable tension slightly.

Derailleur feels stiff or sluggish

Clean the pivot points with a degreaser, dry, and apply a light bicycle lubricant.

Pros and Cons

Pros

  • Highly compatible with common seat tube sizes
  • Dual-pull cable routing works with almost all frame cable setups
  • Reliable and consistent shifting performance
  • Affordable maintenance and replacement component

Cons

  • Not compatible with high-speed drivetrains (8-speed and above)
  • Requires specific tool knowledge for accurate indexing
  • Heavier than higher-end groupset components

Setup, Compatibility & Care

To install, ensure your frame seat tube diameter matches the 31.8mm or 34.9mm clamps. Use the included adapter shim if your frame uses the smaller diameter. Once mounted, the dual-pull mechanism allows you to route the derailleur cable based on your frame's specific requirements.

  1. Secure the derailleur to the frame seat tube.
  2. Adjust the 'L' (Low) limit screw to center the cage over the small chainring.
  3. Attach the cable, ensuring there is light tension.
  4. Use the 'H' (High) limit screw to prevent the chain from dropping off the large chainring.

Keep the pivot points lightly lubricated with bicycle-specific chain oil to maintain smooth operation, and inspect the cage periodically for debris or bent plates.

Price History

DatePrice
Visit shop