Best current price£10.47from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£10.47Visit shop HENGST FILTER Oil filter VW,VOLVO H19W06 7984303,7984460,149100000 Engine oil filter 074115561,075115561,1328162,13281621
Visit shop12 offers from £10.47 - £23.56
View price history by clicking the chart icon.
1 offer from £17.00
View price history by clicking the chart icon.
This Hengst H19W06 oil filter is designed for owners of various VW and Volvo models seeking reliable engine protection. Its primary benefit is effectively capturing contaminants like dirt, metal particles, and sludge, ensuring cleaner oil and extended engine component life. A potential caveat is the need for specific vehicle compatibility checks before purchase. Key features include its spin-on design for easy installation and construction that meets or exceeds OEM standards.
| Model Part Number | H19W06 |
|---|---|
| Brand | Hengst |
This filter is suitable for various VW T4 models (2.4, 2.4D, 2.5TDI 5-cylinder), VW LT 28-50, and Volvo 740, 760, 780, 940, 960 series vehicles. It is essential to verify fitment for your specific car model and year.
It is generally recommended to replace the oil filter during every oil change, or as per your vehicle manufacturer's recommended service interval. Consult your owner's manual for the precise schedule.
No, the Hengst H19W06 features a spin-on design intended for quick and easy installation, typically requiring only a standard oil filter wrench and hand tightening.
A spin-on filter is a self-contained unit that screws directly onto a threaded mounting post on the engine. This contrasts with older cartridge-style filters that require a separate housing.
Yes, the Hengst H19W06 is designed to meet or exceed original equipment manufacturer (OEM) standards for fit, function, and filtration performance.
This filter is designed to capture common engine oil contaminants such as dirt, metal particles from engine wear, and sludge that can form over time.
Use a proper oil filter wrench. If stuck, try tapping the filter lightly with a rubber mallet in the direction of loosening. Ensure you are turning it counter-clockwise.
Verify the old gasket was completely removed. Ensure the new filter gasket was lightly oiled and the filter was tightened correctly (hand-tight plus 3/4 to 1 turn). Check for damage to the filter mounting surface.
Confirm that the Hengst H19W06 is the correct part number for your specific vehicle model and engine. Refer to compatibility charts or consult a parts professional.
Setup: The Hengst H19W06 is a spin-on filter, designed for straightforward installation. Before installation, ensure the engine is cool. Apply a thin film of clean engine oil to the rubber gasket of the new filter. Screw the filter on by hand until the gasket contacts the mounting surface, then tighten an additional 3/4 to 1 full turn, or as specified by the vehicle manufacturer. Do not overtighten.
Compatibility: This filter is specifically listed for VW T4 models with 2.4, 2.4D, and 2.5TDI 5-cylinder engines, VW LT 28-50, and Volvo 740, 760, 780, 940, 960 series vehicles. Always double-check your vehicle's owner's manual or consult a parts specialist to confirm fitment for your specific year and model.
Care: As a disposable maintenance item, the Hengst H19W06 does not require 'care' in the traditional sense. Its effectiveness is dependent on timely replacement. It is recommended to replace the oil filter every time you change your engine oil, or according to your vehicle manufacturer's recommended service interval, whichever comes first.
