2 Dial Square Thermostatic Shower Mixer Valve, Handset & Riser Rail Kit - Nes Home

Wipe all surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive soap. Rinse with clean water and dry thoroughly. Never use abrasive cleaners or scouring pads.

The anti-scalding device is a safety feature integrated into the thermostatic mixer. It automatically shuts off or reduces the hot water flow if the temperature exceeds a safe preset limit, preventing burns.

The components are designed as a set. While individual parts might be replaceable, ensure any replacement parts are compatible with the existing mixer valve and riser rail system to maintain performance and warranty.

This mixer typically requires a minimum water pressure to operate the thermostatic function effectively. Please refer to the product's technical specifications or consult a plumber for specific pressure requirements.

While not always mandatory, professional installation by a qualified plumber is strongly recommended to ensure the safe and correct functioning of the thermostatic controls and anti-scalding features, and to prevent potential water damage.

The handset is mounted on a slider rail. To adjust its height, typically you would press a button or lever on the slider mechanism and move the handset holder up or down the rail to your desired position.

Ensure the thermostatic mixer is correctly installed and that both hot and cold water supplies are adequate. Check for any kinks in the water hoses or blockages in the filters.

Thermostatic valves have a maximum temperature limit for safety. If the water is not reaching a desired high temperature, consult the installation manual or a professional plumber to check settings and water supply.

Check and clean the showerhead and handset nozzles for limescale buildup. Ensure the main water supply valves are fully open and that there are no blockages in the internal filters of the mixer.

Check the screws securing the slider rail. For stiffness, a small amount of silicone lubricant on the rail might help. For looseness, tighten the retaining screws.