Best current price£60.93from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£60.93Visit shop Duckhams Qs 10W-40 Rmv Semi Synthetic Engine Oil 5 Litres, Acea A3/B4, Api Sp, Vw 501.00/505.00, Premium Motor Oil For Petrol & Diesel Fuel Injected & 5060660340880
Visit shop1 offer from £60.93
View price history by clicking the chart icon.
The Duckhams QS 10W-40 RMV Semi Synthetic Engine Oil is designed for drivers seeking to maximize fuel efficiency and engine protection, particularly commuters and long-distance travelers. Its key benefit is providing advanced protection from cold starts through to high temperatures and heavy loads, while keeping the engine clean. A potential consideration is that it is a semi-synthetic oil, which may not be suitable for all high-performance or specialized engines requiring full synthetic formulations.
| Model Part Number | QS 10W-40 RMV |
|---|---|
| Brand | Duckhams |
Semi-synthetic oils are a blend of mineral base oils and synthetic base oils, offering better performance than conventional oils but typically not reaching the extreme temperature ranges or longevity of fully synthetic oils.
Consult your vehicle's owner's manual for the recommended oil change interval. This typically ranges from 5,000 to 10,000 miles, but can vary based on driving conditions (e.g., frequent short trips, heavy towing).
No, it is critical to use the exact viscosity grade (e.g., 10W-40) and specifications recommended in your vehicle's owner's manual. Using the wrong grade can harm your engine.
While 'QS' is part of the product designation, the 'Engineered for Fuel Efficiency' description indicates its primary benefit.
This oil meets API CF specifications, which are relevant for diesel engines. However, always check your diesel vehicle's owner's manual to confirm that it specifically recommends ACEA A3/B4, API SP/CF, and the other listed manufacturer approvals.
The most accurate place to find the required oil specifications is your vehicle's owner's manual. It will list the recommended viscosity grade and industry/manufacturer standards.
Ensure the correct oil viscosity and specifications were used. Check that the oil filter is properly tightened and that no oil is leaking from the drain plug or filter. Verify the correct oil level.
Check the oil level immediately. If low, add the correct oil type and viscosity. If the level is correct, the issue may require further inspection by a qualified mechanic, potentially related to the oil pressure sensor.
Inspect the oil drain plug and oil filter for tightness. If leaks persist, it may indicate a faulty drain plug washer, damaged oil filter seal, or other engine seals requiring professional attention.
Compatibility: This engine oil is specifically designed for vehicles requiring a 10W-40 viscosity grade and meeting the following specifications: ACEA A3/B4, API SP/CF, Renault RN0700 / RN0710, Mercedes-Benz MB 229.3 / MB 226.5, PSA B71 2300, and Volkswagen VW 501.00 / 505.00. Always consult your vehicle's owner's manual to confirm the correct oil specification and viscosity grade before use. Using the incorrect oil can lead to engine damage.
Setup: Engine oil should only be changed when the engine is warm, as this allows contaminants to be suspended and drained more effectively. Ensure the vehicle is safely supported on jack stands or a lift. Locate the oil drain plug and oil filter. Drain the old oil into a suitable container, then replace the drain plug. Remove the old oil filter, lubricate the rubber seal of the new filter with a small amount of clean engine oil, and screw it into place hand-tight plus an additional three-quarters of a turn. Refill the engine with the correct amount and type of new engine oil specified in your owner's manual.
Care: Dispose of used engine oil and filters responsibly. Check the oil level regularly using the dipstick and top up as needed between scheduled oil changes. Adhere to the manufacturer's recommended oil change intervals, which are typically found in your vehicle's owner's manual. These intervals can vary based on driving conditions (e.g., severe vs. normal use).
