Rema Tip Top Schrader Type 90 deg Bend Valve Extension - PO16
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Rema Tip Top Schrader Type 90 degree bend valve extension (PO16) is for vehicle owners and mechanics who need a more convenient way to inflate tires and check tire pressure, especially on vehicles with awkwardly positioned valve stems. Its key benefit is improved accessibility, making maintenance simpler. A potential caveat is ensuring compatibility with your specific valve type before purchase.
All features
| Model Part Number | PO16 |
|---|---|
| Brand | Rema Tip Top |
Extended Product Information
FAQs
What type of valves does this extension fit?
This extension is designed specifically for Schrader type valves, commonly found on most cars, trucks, and motorcycles.
Will this extension fit all tires?
It will fit any tire equipped with a Schrader valve. It is not compatible with Presta or Dunlop valves.
How do I install the valve extension?
Simply unscrew the existing valve cap and screw the extension onto the Schrader valve stem. Ensure it is snug but avoid overtightening.
Can I leave the extension on permanently?
Yes, it can be left on, but it is recommended to replace the valve cap on the extension to protect the internal mechanism from dirt and moisture.
Does this extension affect tire pressure accuracy?
When properly installed, it should not affect accuracy. It provides a stable point for your gauge or inflator to connect.
How should I clean the valve extension?
Wipe it down with a damp cloth. Avoid using harsh chemicals or abrasive materials.
What is the purpose of the 90-degree bend?
The 90-degree bend is designed to provide easier access to tire valves that are positioned in hard-to-reach locations, such as on the inside of a wheel or near vehicle components.
Troubleshooting
Extension leaks air
Ensure the extension is screwed on tightly to the valve stem. Check the rubber seal inside the extension for damage or debris and clean if necessary. Verify that the valve stem itself is not damaged.
Difficulty screwing extension onto valve
Check for any damage or debris on the threads of both the valve stem and the extension. Ensure you are using the correct type of valve (Schrader).
Inaccurate tire pressure reading
Make sure the extension is properly seated and sealed. Use a separate, calibrated tire pressure gauge to verify the reading. Ensure the air compressor or gauge is functioning correctly.
Pros and Cons
Pros
- Enhances accessibility to tire valves
- Simplifies tire pressure checks and inflation
- Durable and reliable for long-term use
- Compatible with common Schrader valves
- Helps prevent damage to the original valve stem
Cons
- May add slight bulk to the valve stem
- Requires correct valve type (Schrader) for compatibility
- Not suitable for Presta or Dunlop valves
- Potential for overtightening if not careful
Setup, Compatibility & Care
Setup:
- Ensure the tire is at a stable temperature (ideally not recently driven).
- Remove the existing valve cap from the tire valve stem.
- Screw the Rema Tip Top PO16 extension onto the Schrader valve stem securely but do not overtighten.
- Use a tire pressure gauge or air compressor to check and adjust tire pressure through the extension.
- Replace the valve cap on the extension when finished.
Compatibility:
- This product is designed exclusively for Schrader type valves. It will not fit Presta or Dunlop valves.
- Confirm your vehicle's tire valves are Schrader type before purchase.
Care:
- Clean the extension periodically with a damp cloth.
- Avoid using harsh solvents or abrasive cleaners.
- Store in a dry place when not in use to prevent corrosion.