Best current price£49.75from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£49.75Visit shop Rimblades Silver Rimsavers Alloy Wheel Rim Protectors Kit
Visit shop
B&Q£49.95Visit shop B&Q - Alloy Wheel Rim Protector By RimsaversProtects From Kerb RashGrey
Visit shop5 offers from £49.75 - £57.99
View price history by clicking the chart icon.
This guide is for car owners looking to protect their alloy wheels from curb damage, offering a sleek, factory-style finish and maximum strength. The key benefit is robust, long-lasting protection with a straightforward DIY installation. A key caveat is that these protectors are only suitable for flat-edged wheel rims and will not fit wheels with curved or rounded outer edges. Rimblades Rim Protectors are designed for high-value wheels, performance cars, and daily drivers who frequently park near curbs.
| Colour | Silver |
|---|---|
| Model Part Number | RBRSSLVR |
| Brand | Rimblades |
No, Rimblades Rim Protectors are specifically designed for wheels with flat-edged rim profiles. They will not fit correctly on wheels that have a curved or rounded outer edge.
Each Rimsaver profile is approximately 2.1 meters long, and the kit is designed to fit wheels up to 24 inches in diameter.
While the kit includes glue, cleaning wipes, and adhesion promoter, you may need a sharp cutting tool (like a utility knife or scissors) to trim the profiles to size. Ensure the cutting tool is sharp for a clean cut.
The exact curing time can vary based on environmental conditions. It is best to refer to the specific instructions provided with the glue for optimal curing times before driving.
Rimblades are designed for a semi-permanent fit. Removal may be possible but could leave adhesive residue or potentially damage the wheel surface if not done carefully. Professional advice on removal is recommended.
Clean with a soft cloth, mild soap, and water. Avoid abrasive cleaners or high-pressure washing directly on the protectors, as this can affect their adhesion and finish.
The kit includes 4 Rimsaver profiles (approx. 2.1m each), colour-matched joining clips, specialized glue, IPA cleaning wipes, and 3M adhesion promoter sachets.
Ensure the rim was thoroughly cleaned and dried before installation. Re-apply the 3M adhesion promoter and use sufficient glue. Allow adequate curing time before driving.
Measure the rim circumference carefully before cutting. Ensure the cut is precise. Re-measure and cut a new piece if necessary. For joining, overlap slightly before applying the clip and glue for a secure finish.
Ensure the ends of the Rimsaver profiles are cut cleanly and meet at a slight angle for easier clip application. Apply a small amount of glue to the inside of the clip before pressing it into place.
This typically indicates insufficient surface preparation or inadequate glue application. Clean the affected area of the rim again, re-apply adhesion promoter and glue, and ensure proper curing time. Consider using a stronger automotive-grade adhesive if the issue persists.
Compatibility Check: Before installation, verify that your alloy wheels have a flat, continuous outer edge. These protectors are not suitable for wheels with rounded, curved, or split profiles. Test fit by placing the profile against the rim's edge.
Preparation: Ensure the wheel rim is clean, dry, and free from dirt, grease, or brake dust. Use the provided IPA cleaning wipes to thoroughly clean the rim surface where the protector will be applied. Allow it to dry completely. Use the 3M adhesion promoter on the cleaned rim surface as directed on the sachet to enhance bonding.
Installation: Cut the Rimsaver profile to the required length for each wheel using appropriate tools (not included). Apply a thin, even bead of the provided glue to the back of the Rimsaver profile. Carefully press the Rimsaver onto the prepared rim edge, starting from one point and working your way around. Use the colour-matched joining clips to secure the ends of the profile neatly and ensure a continuous look. Allow the glue to cure fully according to the glue manufacturer's instructions before driving.
Care: Clean the Rimsavers and wheels with mild soap and water. Avoid harsh chemicals or abrasive cleaning tools that could damage the finish.
