Exhaust Manifold Gasket - Elring - 438710

This is an Elring Exhaust Manifold Gasket compatible with various BMW models including the E46 3 S...

Best current price£4.88from Autodoc

All Offers

11 offers from £4.88 - £14.83

View price history by clicking the chart icon.

AutodocELRING Exhaust Manifold Gasket BMW 438.710 18407506778 Exhaust Header Gasket,Exhaust Collector Gasket,Gasket, exhaust manifold
£8.45 delivery
£4.88
Visit shop
eBayExhaust Manifold Gasket For Bmw - ELRING 438.710
Free delivery in 1–3 days
£8.10
Visit shop

Product Information

Full details

This Elring Exhaust Manifold Gasket (part number 438710) is designed for BMW E46 3 Series, E83 X3, and E85 Z4 models. It provides a crucial seal for your vehicle's exhaust system, ensuring efficient operation and preventing leaks. A potential caveat is the need for precise installation to avoid premature failure.

All features

Model Part Number438710
BrandElring

Extended Product Information

FAQs

What is the BMW part number this gasket replaces?

This Elring Exhaust Manifold Gasket (438710) replaces the BMW part number 18407506778.

What BMW models is this gasket compatible with?

It is compatible with various BMW E46 3 Series models, the E83 X3, and the E85 Z4 Roadster.

Can I install this gasket myself?

Installation requires mechanical knowledge and specific tools. If you are not experienced with exhaust system repairs, it is recommended to have a qualified technician perform the installation.

What are the signs of a bad exhaust manifold gasket?

Common signs include exhaust leaks (audible hissing or puffing sounds, especially on cold starts), reduced engine performance, and potentially a decrease in fuel efficiency.

How important is cleaning the mating surfaces?

It is critical. Any debris, carbon buildup, or old gasket material on the mating surfaces can prevent a proper seal, leading to leaks and potential gasket failure.

What torque specifications should I use?

Always refer to the specific service manual for your BMW model to obtain the correct torque specifications and tightening sequence for the exhaust manifold bolts.

Troubleshooting

Exhaust leak detected after installation

Verify that all manifold bolts were torqued to specification in the correct sequence. Ensure mating surfaces were perfectly clean and flat. Recheck gasket orientation.

Ticking or puffing noise from exhaust area

This often indicates a leak. Check for loose manifold bolts or a faulty gasket. Inspect for cracks in the exhaust manifold itself.

Gasket failed prematurely

Ensure the correct gasket was used for the specific BMW model. Improper torque, contaminated mating surfaces, or excessive engine vibration can contribute to premature failure.

Pros and Cons

Pros

  • Ensures proper sealing of the exhaust system.
  • Designed to withstand high engine temperatures.
  • Helps maintain optimal engine performance by preventing leaks.
  • High-quality materials for longevity.
  • Direct replacement for OEM part.

Cons

  • Requires specialized tools and knowledge for installation.
  • Improper installation can lead to leaks or gasket failure.
  • Limited to specific BMW models; not a universal part.

Setup, Compatibility & Care

Compatibility: This gasket is specifically designed for the following BMW models:

  • BMW E46 3 Series (Sedan, Touring, Coupe, Convertible, Compact)
  • BMW E83 X3
  • BMW E85 Z4 Roadster

Refer to your vehicle's service manual or consult a professional to confirm fitment using the BMW part number 18407506778 or Elring part number 438710.

Setup (Installation):

  1. Safety First: Ensure the engine is completely cool. Disconnect the battery.
  2. Access: Remove any components obstructing access to the exhaust manifold.
  3. Removal: Carefully unbolt the exhaust manifold from the cylinder head. Remove the old gasket.
  4. Cleaning: Thoroughly clean both the cylinder head and exhaust manifold mating surfaces, ensuring they are free of debris, old gasket material, and carbon buildup.
  5. Installation: Place the new Elring gasket in the correct orientation. Reattach the exhaust manifold, tightening bolts in the specified sequence and to the manufacturer's torque specifications.
  6. Reassembly: Reinstall any removed components and reconnect the battery.

Care: This is a maintenance part. Regular inspection of the exhaust system for leaks is recommended. If any unusual noises or smells are detected, have the system inspected by a qualified technician.

Price History

DatePrice
Visit shop