Bona Mega Gloss Lacquer - White

The primary advantage is its ability to deliver the robust protection of a two-component lacquer with the simpler application of a one-component product, offering superior resistance to spills and scrapes.

No, Bona Mega Gloss Lacquer is specifically designed for wooden floors.

Yes, it is highly recommended for use with underfloor heating systems.

The floor can typically be used with light foot traffic after 24 hours, but full curing, ensuring maximum durability and scratch resistance, takes approximately 7 days, though this can vary slightly based on environmental conditions.

Clean spills immediately with a damp cloth and use Bona's specialized wood floor cleaners for routine maintenance. Avoid harsh chemicals or abrasive pads.

Typically, two to three coats are recommended for optimal protection and finish, depending on the condition of the subfloor and the desired level of durability.

The white colour is a pigment that provides a subtle white tone to the finish. It applies like any other lacquer, but ensure even application to avoid inconsistencies in colour distribution.

Ensure the surface is properly prepared and free from dust. Apply the lacquer evenly with a suitable applicator, working in consistent strokes and avoiding overworking the product. Maintain a wet edge during application.

Verify that the floor surface was adequately prepared, clean, and dry before application. Ensure no contaminants like wax or silicone were present. Check compatibility with any existing finishes if not applying to bare wood.

While durable, the lacquer requires a full curing period (typically several days to two weeks). Avoid heavy foot traffic and placing abrasive items on the floor until fully cured. Ensure adequate application thickness.

Confirm the correct product variant (Gloss) was used and applied evenly. Ensure proper application technique and sufficient drying time between coats. The surface may require a final polish if applied in very humid or cold conditions.