Hozelock Plus Rectangular Sprinkler - Grey

The Hozelock Plus Rectangular Sprinkler is designed for rectangular areas and its coverage can be adjusted. While specific dimensions vary with water pressure, it is generally effective for areas up to 10 meters in length and 15 meters in width, depending on spray pattern adjustments.

Yes, the sprinkler features adjustable spray settings for both pattern and distance, allowing you to customize coverage for different lawn shapes and sizes.

Rinse the sprinkler with clean water after use and check for debris in the nozzles. A soft brush can be used to gently clean any stubborn blockages. Ensure it is dry before storing.

The sled-mounted design provides stability on most surfaces. For very steep slopes, additional support or careful placement may be required to ensure consistent operation and coverage.

The sprinkler works best with standard domestic water pressure. Very low pressure may affect oscillation and spray distance, while excessively high pressure should be managed with the flow control.

The plastic is designed to be durable for outdoor use, resistant to UV light and general wear. However, like all plastic items, it should be protected from extreme weather conditions, especially frost, for maximum longevity.

Check that the water supply is on and providing adequate pressure. Ensure the hose connection is secure and there are no kinks in the hose. Clean any debris from the nozzles and the gear drive mechanism.

Adjust the spray pattern and range settings. Ensure the sprinkler is placed on a level surface. Check for consistent water pressure from your tap. Clean clogged nozzles.

Tighten the hose connection to the sprinkler. Check the washer inside the hose connector for damage or wear and replace if necessary.

Verify that the main water tap is fully open. Check the hose for kinks. Clean the filter located at the water inlet and ensure the flow control is not set too low.