Nightsearcher NEXSUN-2000 - Solar Powered Flood Light
An all-in-one solar powered light, the NexSun 2000 features a built-in mono-crystalline solar pane...An all-in-one solar powered light, the NexSun 2000 features a built-in mono-crystalline solar panel to charge the 2000 mAh 3.7V lithium battery in just 7.5 hours! The integrated passive infrared (PIR) motion sensor has a detection distance of 8-15 metres. Paired with a lux sensor to measure the sunlight, the NexSun 2000 operates automatically from dusk through to dawn. The included remote control enables the selection and personalisation of Motion activated PIR, and timed illumination modes. This range of advanced solar-powered lighting options was designed to provide unmatched illumination and security for all outdoor spaces. From compact wall lights to powerful floodlights, each unit is meticulously crafted to cater to various needs and settings, ensuring optimal lighting for residential areas, sites, gardens, walkways, and more. Features and Benefits: Powered by solar energy, harnessing the sun's energy to provide efficient and sustainable illumination. Passive Infrared (PIR) motion sensor detects motion and triggers the light to turn on, enhancing security. Designed to be wall-mountable and some are also pole-mountable, offering flexibility in installation locations. Each product is constructed to withstand outdoor conditions, ensuring longevity and reliability. Utilizing solar power and motion sensors, these products are energy-efficient, helping you save on electricity costs. Typical Uses: Residential Areas, Site Work, Gardens, Walkways, Trade & DIY.
The Nightsearcher NEXSUN-2000 is an all-in-one solar-powered floodlight designed for outdoor security and illumination in residential areas, gardens, walkways, and worksites. Its key benefit is sustainable, cost-effective lighting with intelligent motion and dusk-to-dawn activation. A potential caveat is its reliance on sufficient sunlight for optimal charging.
All features
Model Part Number
NEXSUN-2000
Brand
Nightsearcher
Extended Product Information
FAQs
How long does the battery typically last on a full charge?
Battery life depends on usage patterns, mode selection, and the amount of sunlight received for charging. With optimal conditions and moderate use, it can last through the night.
Can I replace the lithium battery?
The lithium battery is integrated into the unit and is not designed for user replacement. Proper solar charging and care will help maximize its lifespan.
What is the detection range of the PIR motion sensor?
The Passive Infrared (PIR) motion sensor has a detection range of 8 to 15 meters.
How do I adjust the settings on the NEXSUN-2000?
All settings, including motion activation, timed illumination, and sensitivity, can be adjusted using the included remote control.
Is the light suitable for heavy rain?
The unit is designed to withstand outdoor conditions, implying a degree of water resistance. However, direct submersion should be avoided.
How many hours of sunlight are needed to fully charge the battery?
The 2000 mAh battery can be fully charged in approximately 7.5 hours of direct sunlight.
Can this light be mounted on a pole?
While the NEXSUN-2000 is primarily designed for wall-mounting, specific pole-mounting accessories may be available separately depending on the product's intended accessories, but it is not a standard feature.
Troubleshooting
Light does not turn on
Ensure the solar panel is clean and receives direct sunlight. Check if the unit has been charged sufficiently. Verify that the unit is set to operate in the current light conditions (e.g., not during daylight if set to dusk-to-dawn).
Motion sensor is not triggering the light
Confirm the motion sensor is within its detection range (8-15 meters) and that there are no obstructions. Check the remote control settings to ensure motion activation is enabled and sensitivity is set appropriately.
Light is dim or not lasting long
The battery may not be charging sufficiently. Clean the solar panel and ensure it is exposed to direct sunlight. Reduce the brightness or duration settings if available via the remote to conserve power.
Unit does not operate automatically at dusk
Ensure the lux sensor is clean and not obstructed. Verify that the unit is set to the automatic dusk-to-dawn mode using the remote control.
Pros and Cons
Pros
Environmentally friendly and sustainable lighting solution.
Reduces electricity bills due to solar power.
Flexible installation options (wall-mountable).
Intelligent motion detection enhances security.
Automatic operation simplifies use.
Durable construction for outdoor environments.
Cons
Performance dependent on sufficient sunlight for charging.
Initial setup might require understanding of different modes.
PIR sensor range may vary based on environmental factors.
Requires manual cleaning of the solar panel for optimal efficiency.
Remote control needs to be kept safe and accessible.
Setup, Compatibility & Care Instructions
Setup:
Choose a Location: Select a spot that receives direct sunlight for at least 6-8 hours daily to ensure optimal battery charging.
Mounting: Securely mount the unit to a wall using appropriate fixings (not included). Ensure the solar panel faces the sun for maximum exposure.
Initial Charge: Allow the unit to charge for a full day before first use.
Remote Configuration: Use the included remote control to select your preferred operating mode (motion-activated, timed illumination, dusk-to-dawn) and adjust settings like sensitivity and duration.
Compatibility:
The NEXSUN-2000 is designed for outdoor use.
It is compatible with most standard wall-mounting hardware.
Care:
Solar Panel Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that could impede charging efficiency. Avoid abrasive cleaners.
Battery Maintenance: The lithium battery is integrated and does not require user maintenance. Ensure the unit is exposed to sufficient sunlight regularly to maintain battery health.
Sensor Check: Periodically ensure the PIR and lux sensors are clear of obstructions.