Best current price£5.24from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£5.24Visit shop Sealey Shcss0x Hose Clip Stainless Steel Ø22-32Mm Pack Of 10
Visit shop
B&Q£10.60Visit shop B&Q - Hose Clip Stainless Steel Size 22-32mm Din 3017 Pack Of 10 Shcss0X
Visit shop52 offers from £5.24 - £51.95
View price history by clicking the chart icon.
This guide is for anyone needing reliable hose connections. The Sealey SHCSS1A hose clip offers secure clamping for hoses in the 25-38mm range, manufactured to DIN 3017 standards using Grade SS301A stainless steel for durability. A key benefit is its robust construction ensuring a leak-free seal. However, ensure your hose diameter falls within the specified range before purchase.
| Model Part Number | SHCSS1A |
|---|---|
| Brand | Sealey |
The Sealey SHCSS1A hose clip is designed for hoses with an outer diameter ranging from 25mm to 38mm.
It is manufactured from Grade SS301A stainless steel.
Each pack contains 10 hose clips.
Yes, when properly tightened on a suitable hose and fitting, they provide a secure clamp suitable for many common pressure applications. Always ensure the entire assembly is rated for the intended pressure.
DIN 3017 is a German national standard that specifies requirements for hose clamps, ensuring consistent quality, dimensions, and performance.
Yes, stainless steel hose clips are generally suitable for fuel lines, provided the size matches and the material is compatible with the specific fuel type. Always check manufacturer recommendations for critical fuel systems.
Measure the outer diameter of your hose where it will connect to the fitting. If your measurement falls outside the 25-38mm range, you will need a different size clip from the Sealey range (e.g., SHCSS0 for 16-27mm or SHCSS2 for 51-70mm).
Ensure the hose diameter is within the 25-38mm range and that the hose is properly seated on the fitting. Check that the screw mechanism is clean and free of debris. If the hose is too soft or damaged, it may not provide enough resistance for the clip to tighten effectively.
While SS301A stainless steel is highly resistant, extreme conditions can cause surface oxidation. Clean the clip with a mild detergent and water. For severe rust, a specialized stainless steel cleaner may be required. Ensure the clip is not in prolonged contact with dissimilar metals, which can cause galvanic corrosion.
Verify the hose is completely covering the barb or spigot of the fitting. Ensure the clip is positioned correctly over the hose and fitting junction, and that it is tightened sufficiently to create a seal without crushing the hose.
Setup: To install the SHCSS1A hose clip, place it around the hose and the fitting it connects to. Ensure the hose is fully seated on the fitting. Use a screwdriver or nut driver to tighten the screw mechanism until the band is snug and the hose is securely clamped. Avoid over-tightening, which can damage the hose.
Compatibility: This hose clip is designed for hoses with outer diameters ranging from 25mm to 38mm. It is compatible with most standard rubber, silicone, and PVC hoses within this size specification. Always confirm your hose's outer diameter matches the clip's range before use.
Care: The SS301A stainless steel construction offers excellent resistance to rust and corrosion. For general maintenance, simply wipe the clips clean with a damp cloth if they become dirty. In corrosive environments, periodic inspection and cleaning will help prolong their lifespan.
