Hammer and Tongs Wire Coat Hook - 70mm x 90mm - Black

The hook is forged from iron with a classic powder-coated finish.

The approximate dimensions are 70mm x 90mm. Please note that as the product is handmade, measurements can vary slightly.

No, this product is not suitable for bathrooms or any unheated/damp rooms due to the nature of cast iron, which is prone to rusting.

You must drill a pilot hole before inserting the screws to prevent shearing, and all screws should be tightened by hand. Do not use power tools.

Regular maintenance with a household wax polish is required to help prevent rusting. Ensure the hook is installed in a dry environment.

Ensure you have drilled an appropriate pilot hole. If the hole is too small, the screw can shear. Try re-drilling with a slightly larger bit if necessary, ensuring it's suitable for the wall type.

Yes, the product comes with screw fixings.

Always drill a pilot hole first and tighten screws by hand. Do not use power tools.

This indicates exposure to moisture. Move the hook to a drier location and apply household wax polish regularly to prevent further rusting. If rust is extensive, consider replacement.

Ensure the pilot hole was drilled correctly and the screws are fully, but not overly, tightened by hand. Check if the wall material is suitable for secure screw fixing.