Best current price£3.72from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£3.72Visit shop GARDENA 13216-20 Micro-Drip T-piece 4.6mm 5 pcs Easy & Flexible setup
Visit shop
B&Q£8.27Visit shop B&Q - T-Joint 3/16" With Thread
Visit shop34 offers from £3.72 - £13.13
View price history by clicking the chart icon.
The Gardena Micro-Drip-System T-Piece (4.6 mm / 3/16 inch) is designed for gardeners looking to expand their existing Micro-Drip irrigation systems. It allows for easy branching of supply pipes and drip irrigation lines, enabling more customized watering for garden beds, flower boxes, and potted plants. While it offers flexible installation and reusability, users must ensure they have the compatible Master Unit for stable water pressure.
| Colour | Black |
|---|---|
| Model Part Number | 13211-20 |
| Brand | Gardena |
The T-Piece is used to branch off or split a 4.6 mm (3/16 inch) supply pipe or drip irrigation line within the Gardena Micro-Drip system, allowing for more complex or extended irrigation layouts.
Each pack contains 10 T-pieces.
No, installation is tool-free thanks to Gardena's Easy & Flexible connection technology. Pipes simply push into the connectors.
These T-pieces are specifically designed for use with 4.6 mm (3/16 inch) Gardena Micro-Drip system pipes.
Without a Master Unit (like the 1000 or 2000), your Micro-Drip system may not have stable water pressure, which can affect the performance and even distribution of water to your plants.
They are made from plastic and manufactured in Europe, indicating a quality product designed for garden use. Like all plastic components, they should be protected from extreme weather when not in use.
No, this T-piece is exclusively for 4.6 mm (3/16 inch) diameter pipes and cannot be used with larger diameter pipes like 13 mm (1/2 inch).
Ensure the 4.6 mm pipe is pushed fully and securely into the T-piece. Check the pipe for any damage or kinks at the connection. Ensure the connection is made to a compatible Gardena pipe.
Check for blockages within the T-piece or the connected pipes. Ensure the Master Unit is functioning correctly and providing adequate pressure. If too many branches are added, consider using a Master Unit with higher capacity.
Verify that you are using the correct 4.6 mm (3/16 inch) diameter Gardena pipe. Ensure the end of the pipe is clean and free of debris. Slightly warm the pipe end in warm water if it feels stiff, then attempt connection again.
Setup: To set up the T-Piece, simply connect it to the 4.6 mm (3/16 inch) Gardena Supply Pipe or Drip Irrigation Line. Push the pipe firmly into the T-piece connectors until secure. For branching, connect the incoming pipe to one of the side ports and the outgoing pipe to the remaining side port, or connect the outgoing pipe to the opposite side port.
Compatibility: This T-piece is designed specifically for the 4.6 mm (3/16 inch) diameter pipes within the Gardena Micro-Drip-System. It is compatible with other Gardena Micro-Drip components and requires connection to a water source via a Gardena Master Unit (1000 or 2000).
Care: Clean the T-pieces periodically with a damp cloth to remove any dirt or debris. Ensure connections are clear before reassembling the system. Store in a dry place when not in use.
