TRADEDOWNCO Peel & Stick Self-Adhesive Wall Tiles - Glossy Cloud White Subway

Each tile is oversized, measuring 30 x 30 cm (12"x12").

No, these are self-adhesive tiles designed for grout-free installation. They feature an interlocking design for a seamless look.

They are waterproof and moisture-defying, making them suitable for splashback areas. However, they should not be used in areas of direct, prolonged water submersion, such as inside a shower stall where water constantly hits the surface.

Yes, you can install them over existing smooth, flat, and firmly adhered tiles. Ensure the surface is clean and dry before application.

Clean the tiles using a soft, damp cloth. For tougher grime, a mild soap can be used, followed by rinsing with clean water. Avoid abrasive cleaners.

The tiles are hob-safe and heat-resistant, designed for backsplashes. However, it's recommended to maintain a safe distance from direct high heat sources as per stove manufacturer guidelines.

They are engineered for durability and are designed to resist yellowing, peeling, and cracking over time with proper installation and care.

Ensure the surface is thoroughly cleaned, dried, and free from any dust, grease, or residue. For best results, apply to a smooth, non-porous surface. Press firmly during application.

The "TidyStick" technology allows for repositioning shortly after application. Carefully peel back the tile and reapply, ensuring the interlocking edges align correctly before pressing firmly.

This can happen if air is trapped during application. After applying, use a soft cloth or a plastic smoother to push air bubbles towards the edges of the tile. If a bubble persists, you may be able to carefully lift a corner and release the trapped air.

To minimize damage when removing, gently heat the tiles with a hairdryer on a low setting to soften the adhesive. Then, carefully peel away from the surface at a shallow angle.