Shopping.co.uk

Bien Twister Plus Levelling System Pack - 4mm - White

Bien Twister Plus Levelling System Pack - 4mm - White

The Bien Twister Plus Levelling System is an easy-to-use two-part system designed for installing f...

Best current price£19.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£19.99Visit shop

B&Q - Twister Plus 4mm Levelling System Pack. Includes: 1 Pack Of Twister Screw Plus (200 Pcs) & 1 Pack Of Twister Nut Plus (100 Pcs)

Visit shop

All Offers

4 offers from £19.99 - £26.00

View price history by clicking the chart icon.

B&QB&Q - Twister Plus 4mm Levelling System Pack. Includes: 1 Pack Of Twister Screw Plus (200 Pcs) & 1 Pack Of Twister Nut Plus (100 Pcs)
Free delivery in 1–3 days
£19.99
Visit shop
HomebaseBien Twister Plus 4Mm Levelling System Pack
Free delivery in 1–3 days
£26.00
Visit shop
wilkoBien Twister Plus Levelling System Pack - 4mm Spacers - Porcelain Paving Tiles
Free delivery in 1–3 days
£26.00
Visit shop

Product Information

Full details

The Bien Twister Plus Levelling System is designed for both professionals and DIY enthusiasts who need a precise and efficient method for installing floor tiles and exterior porcelain paving. The system helps ensure a level surface, eliminating lippage and significantly reducing installation time. However, it's essential to use tiles within the specified thickness range (6-22 mm) for optimal performance. This guide provides comprehensive information on how to use the system effectively.

All features

ColourWhite
BrandBien

Extended Product Information

FAQs

What tile thicknesses are compatible with the system?

The system is designed for tiles and paving slabs ranging from 6mm to 22mm in thickness.

How many pieces are included in the pack?

The pack includes 200 Twister Screw Plus pieces and 100 Twister Nut Plus pieces.

Can I reuse the components?

Yes, you can reuse the components if they are properly cleaned and stored after each use.

What tools are needed for installation?

You may need a specific tool, depending on your preferred method of tightening the nuts. However, tightening can also be done by hand.

How do I remove the system after the adhesive dries?

The Twister Plus system can be removed by unscrewing the nuts or by gently breaking off the screw at the base after the adhesive has cured.

Where can I purchase replacement components?

Replacement Twister Screw Plus and Nut Plus pieces are available at most tile supply stores.

Is this system suitable for outdoor use?

Yes, the Bien Twister Plus system is designed for both indoor and outdoor applications, including exterior porcelain paving.

Troubleshooting

Tiles are not level after tightening.

Double-check that the tiles are within the 6-22 mm thickness range. Ensure that the Twister Nut Plus is tightened sufficiently. Also, re-evaluate the subfloor for any inconsistencies.

Twister Screw Plus is difficult to insert.

Make sure the adhesive isn't covering the screw holes and that the tiles are aligned correctly. Check for any obstructions preventing easy insertion.

System components are damaged.

Inspect each component before use. Replace any damaged or worn parts with new ones to ensure proper performance.

Pros and Cons

Pros

  • Reduces lippage for a perfectly level surface.
  • Speeds up the tiling process.
  • Suitable for a wide range of tile thicknesses (6-22 mm).
  • Easy to use, even for beginners.
  • Provides a professional finish.

Cons

  • Requires specific Twister Screw Plus and Nut Plus components.
  • Performance is dependent on using tiles within the specified thickness range.
  • May require practice to achieve optimal results.
  • Additional tools may be needed for specific tile types.

Setup, Compatibility & Care

Setup:

  1. Prepare the subfloor, ensuring it is clean, level, and suitable for tiling.
  2. Apply the tile adhesive according to the manufacturer's instructions.
  3. Insert the Twister Screw Plus through the tile, placing it near the edges.
  4. Position the adjacent tile and insert the Twister Nut Plus.
  5. Tighten the nut using the appropriate tool or by hand until the tiles are level.
  6. Allow the adhesive to cure completely before removing the system.

Compatibility:

The Bien Twister Plus Levelling System is compatible with tiles and paving slabs ranging from 6mm to 22mm in thickness. Ensure that the tiles are suitable for the intended application and that the adhesive is compatible with both the tiles and the subfloor.

Care:

  • Clean the Twister Screw Plus and Nut Plus after each use to remove adhesive residue, which could be done with a damp cloth.
  • Store the components in a dry place to prevent corrosion.
  • Replace any damaged or worn components before the next project.

Similar items

Bien Twister Plus Levelling System - WhiteFrom £19Northern Acorn Pendant Light - WhiteFrom £408Global Gizmos Lava Lamp - PinkFrom £18Anglepoise Original 1227 Midi Wide Pendant Light - GreyFrom £237Table Lamp - Multicolor - HOMCOM - UKB31-630V70MX0331From £57Le Creuset Pasta Bowl - OrangeFrom £25Original BTC Drop One Pendant Light - Matt WhiteFrom £299Reed Diffuser - Oval Design - White - Sienna GlassFrom £26Anglepoise Original 1227 Pendant Light - Dove GreyFrom £64Lights4fun TruGlow Votive Tea Lights - BeigeFrom £20LED Ceiling Lamp - PinkFrom £34Clothes Steamer, Garment Steamer Clothing Wrinkle Remover - GreyFrom £45

Price History

DatePrice
Visit shop