Best current price£6.95from eBay
Shopping.co.uk recommended and popular offers
eBay£6.95Visit shop SAKURA Pen-Touch Silver Quick Dry-Permanent Paint Marker SILVER Extra Fine 0.7mm
Visit shop1 offer from £6.95
View price history by clicking the chart icon.
The Sakura Pen-Touch Metallic marker in silver is designed for artists, crafters, and DIY enthusiasts who need a reliable, opaque metallic ink for decorative and calligraphic applications. Its key benefit is the quick-drying, covering metallic ink that provides excellent adhesion on a wide variety of surfaces. A potential consideration is that it requires a shake and pump activation, which might be less convenient for very rapid, continuous use compared to simpler pen formats.
| Model Part Number | 41502 |
|---|---|
| Brand | Sakura |
First, shake the marker vigorously for about 15 seconds. Then, place the tip on a piece of scrap paper and press down gently a few times to pump the ink. You should see the ink begin to saturate the tip.
While the ink is permanent and water-resistant, it's not specifically designed for fabric and may not provide optimal results or durability on textiles. It performs best on hard, non-porous or semi-porous surfaces.
Yes, the ink is permanent and resistant to water, light, and chemicals once dry.
The marker works exceptionally well on paper, cardboard, wood, ceramic, plastic, metal, glass, and stone. Ensure surfaces are clean and dry for best adhesion.
Store the marker horizontally with the cap tightly sealed. This prevents the ink from drying out and ensures it's ready for use.
Yes, the ink is durable and can typically be painted over with other compatible paints once fully dry, though testing on a small area first is recommended.
Yes, the permanent ink is resistant to light, which helps prevent fading over time.
Ensure the marker has been shaken well and the tip has been pumped sufficiently to activate ink flow. Check that the cap was sealed properly when not in use. Try cleaning the tip gently with a damp cloth.
Allow more drying time. The quick-drying nature is relative to the surface and environmental conditions. Ensure the surface is clean and dry before application.
Gently wipe the tip with a slightly damp cloth to remove any dried ink. Avoid excessive pressure. If severely dried, the tip may be permanently affected.
Setup: Before the first use, thoroughly shake the marker. Then, press the tip down onto a scrap piece of paper several times (pump action) until the ink saturates the tip and flows evenly. For subsequent uses, a brief shake and pump may be needed.
Compatibility: This marker is designed for use on a wide range of materials including paper, cardboard, wood, ceramic, plastic, metal, glass, and stone. It is not recommended for porous or untreated surfaces where ink might bleed excessively.
Care: Store the marker horizontally with the cap securely on to prevent the tip from drying out. Keep away from extreme heat and direct sunlight. If the tip becomes clogged with dried ink, you may be able to revive it by gently wiping it with a damp cloth.
