Best current price£166.13from eBay
Shopping.co.uk recommended and popular offers
eBay£166.13Visit shop Rapid PRO R606 Electric Staple/Nail Gun RPDR606
Visit shop
B&Q£180.72Visit shop B&Q - Pro R606 Electric Staple Gun For Picture Frames Drawers Fastening Panelling Soft & Hard Wood No. 606 Staples & No. 8 Brads
Visit shop16 offers from £166.13 - £233.57
View price history by clicking the chart icon.
The Rapid Pro R606 Electric Staple Gun is designed for DIY enthusiasts and professionals needing a reliable tool for precision stapling and nailing in woodworking projects. It offers high performance for demanding tasks, especially with hard and soft woods, making it ideal for assembling small wood constructions like picture frames, drawers, or fastening paneling. While its robust construction ensures durability, users should be aware that it is primarily suited for lighter-duty woodworking and may not be the best choice for heavy structural applications.
| Model Part Number | 10643003 |
|---|---|
| Brand | Rapid |
The R606 is designed for Rapid No. 606 Narrow Crown staples (12-25mm) and No. 8 Brad nails (15-25mm).
First, unplug the tool. Then, remove the front plate to access and clear any jammed staples or nails. Reattach the front plate securely before plugging the tool back in.
While the tool is robust, it is an electric tool and should be used with caution in damp or wet conditions. It is best suited for indoor woodworking or covered outdoor areas.
The maximum firing rate for the Rapid Pro R606 is 20 fasteners per minute.
Yes, the R606 is designed for use with both hard and soft woods, offering high performance for demanding jobs. However, ensure you are using the correct fastener type and length.
The tool comes with a 3.5-meter power cord.
The listed weight is 3.44g. Please note this may be a typo and could refer to kilograms or a different unit; actual weight should be confirmed if precision is critical.
Ensure the tool is plugged in and the magazine is correctly loaded with compatible fasteners. Check for jams and clear them using the removable front plate. Verify the fastener length is within the specified range.
Ensure you are using the correct type and size of staples or nails. Check for any bent or damaged fasteners in the magazine. Clean any debris from the magazine and firing channel. Ensure the front plate is securely reattached after clearing a jam.
Confirm that the fasteners are the correct length for the wood being used. For softer woods, the tool may drive fasteners deeper; for harder woods, ensure you are using fasteners within the upper end of the length range if necessary and that the wood is not too dense.
Check that the power outlet is providing adequate voltage. Ensure the cord is not damaged. Clear any internal blockages that might be restricting the firing mechanism.
Setup: Ensure the R606 is unplugged before loading staples or nails. Open the magazine, load the appropriate fasteners (No. 606 staples 12-25mm or No. 8 brads 15-25mm), and close the magazine securely. Plug the tool into a grounded power outlet. Test fire on a scrap piece of wood.
Compatibility: This tool is designed specifically for Rapid No. 606 Narrow Crown staples and No. 8 Brad nails within the specified length ranges (12-25mm for staples, 15-25mm for brads). Using incompatible fasteners may cause jams or damage the tool.
Care: After each use, unplug the tool. Clean the exterior with a dry or slightly damp cloth. Periodically check the magazine for debris. If jams occur, unplug the tool and use the removable front plate to clear obstructions. Store in a dry, protected area.
