Emily Table Lamp - Dark Green

The Emily Table Lamp requires one E14 LED bulb with a maximum wattage of 7W. Please note that the bulb is not included with the lamp.

This particular product guide is for the Dark Green Emily Table Lamp. For information on other variants, please check the product listings or retailer's website.

The assembled dimensions of the Emily Table Lamp are approximately 37cm (Height) x 18cm (Width) x 18cm (Depth).

The Emily Table Lamp itself does not have a built-in dimming function. If you desire dimmable light, you would need to use a dimmable E14 LED bulb and an external dimmer switch compatible with LED lighting.

Dust the linen shade and glass base regularly with a soft, dry cloth. For the glass base, a slightly damp cloth can be used for spot cleaning, followed immediately by drying with a clean, dry cloth.

It is strongly recommended to use an E14 LED bulb with a maximum of 7W. Traditional incandescent bulbs generate more heat and consume significantly more power, which could pose a safety risk or damage the lamp.

Minimal assembly is required, primarily screwing in the E14 bulb and placing the shade. The lamp comes pre-assembled otherwise.

1. Ensure the E14 bulb is correctly and securely screwed into the lamp holder. 2. Verify that the power cable is firmly plugged into a working electrical outlet. 3. Check the inline power switch on the cable to ensure it is in the 'on' position. 4. Test the outlet with another appliance to confirm it is functioning.

1. Confirm that you are using an E14 LED bulb with a wattage up to 7W. If using a bulb with lower wattage, try a 7W LED bulb. 2. Ensure the bulb is fully functional and not faulty. 3. Remember the lamp is designed for ambient lighting, not as a primary bright light source for an entire room.

1. Gently adjust the natural linen drum shade to ensure it is seated evenly and securely on the lamp's shade support structure. 2. Check if the bulb is correctly installed and not obstructing the shade's proper placement.