HYCHIKA 170W Rotary Tool Kit - 173 Accessories

The tool features 6 variable speed settings ranging from 8,000 to 35,000 RPM.

You must tighten the chuck securely with a spanner before using the tool to ensure the accessory does not dislodge during operation.

This tool is designed for a wide range of applications including cutting, grinding, polishing, and engraving for DIY projects. For very heavy-duty industrial grinding, a more powerful tool may be necessary.

The included flexible shaft is 1 meter long.

The tool can work on a variety of materials including wood, metal, plastic, glass, and stone, depending on the accessory used and the speed setting.

Keep the tool clean, ensure ventilation slots are clear, and periodically check and replace motor brushes when worn.

The weight of the tool is 4.4 pounds.

Ensure the power cord is securely plugged into a working electrical outlet. Check if the on/off switch is in the 'off' position before plugging in. If the issue persists, contact customer support.

Ensure the accessory is inserted fully into the chuck and that the chuck is tightened securely with the spanner. Check if the accessory itself is damaged or bent. Try a different accessory.

Reduce the working load and ensure the ventilation slots are clear of dust. Lower the speed setting if working on a demanding task for an extended period. Allow the tool to cool down between uses if necessary.

Make sure the accessory is properly seated and the chuck is tight. Check for any damage to the accessory. Ensure you are holding the tool firmly and maintaining a steady grip.

Check if the motor brushes are worn and need replacement. Ensure the tool is not overheating. Verify that the speed setting is appropriate for the task and material.