Best current price£30.28from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£30.28Visit shop Sealey Men's Sba22bsa Sharkbite® Straight Adaptor 22Mm X 3/4Inbspt Brass
Visit shop
B&Q£33.97Visit shop B&Q - Sharkbite Straight Adaptor 22mm X 3/4" Bspt Brass To Male Thread Sba22Bsa
Visit shop11 offers from £30.28 - £39.94
View price history by clicking the chart icon.
This Sealey SharkBite Straight Adaptor (SBA22BSA) is designed for professionals and DIY enthusiasts looking to quickly and easily install or expand compressed air ring main systems in workshops. Its key benefit is the fast-fit SharkBite technology, allowing for rapid connections without specialized tools. A caveat to consider is that while it can be used for water movement, it is not intended for potable water applications.
| Model Part Number | SBA22BSA |
|---|---|
| Brand | Sealey |
This adaptor is designed for 22mm outer diameter (OD) pipe, specifically within the Sealey SharkBite Air Supply Ring Main System or compatible systems.
No, this adaptor is not suitable for potable (drinking) water applications. It is intended for compressed air or non-potable water systems only.
BSPT stands for British Standard Pipe Taper. It is a type of pipe thread that creates a seal when tightened. The 3/4" refers to the nominal size of the thread.
No, the SharkBite system is designed for push-fit installation, meaning no special tools are required for connecting the 22mm pipe end.
The Sealey SharkBite SBA22BSA Straight Adaptor has a nett weight of approximately 74 grams (0.07kg).
To disconnect, use a SharkBite release tool or push the collar of the fitting against the pipe while pulling the pipe out.
Ensure the 22mm pipe is fully inserted and seated correctly. Check the pipe for damage or imperfections. Verify that the mating 3/4" BSPT thread is clean and properly sealed.
Confirm you are using a 22mm OD pipe. Ensure the pipe end is clean, dry, and free from burrs or debris. The pipe end should be cut square.
Check for any obstructions within the adaptor or the connected pipe. Ensure all connections are secure and not restricting flow. Verify the air system's overall pressure is adequate.
Setup: To install, ensure the 22mm pipe is clean, dry, and free from burrs. Simply push the pipe end firmly into the 22mm opening of the SharkBite adaptor until it is fully seated. The internal O-ring and gripping mechanism will create a secure seal. The 3/4" BSPT male thread can then be connected to a compatible female threaded fitting.
Compatibility: This adaptor is compatible with Sealey's SharkBite Air Supply Ring Main System and other similar 22mm pipe systems. It connects to any fitting with a 3/4" BSPT female thread. It is suitable for compressed air and non-potable water only; do not use for drinking water.
Care: The brass construction is corrosion-resistant. Periodically check connections for any signs of damage or leaks, especially after initial installation or if the system is moved. Clean the exterior with a dry or slightly damp cloth if necessary. Avoid using abrasive cleaners.
