Rolson Ratchet Tie Down - 25mm x 4.5m
Best current price£9.29from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.29Visit shop Rolson 2pc 25mm Ratchet Tie Down 4.5mtr On Rack 44202
Visit shopeBay£9.29Visit shop One Offer
1 offer from £9.29
View price history by clicking the chart icon.
eBayRolson 2pc 25mm Ratchet Tie Down 4.5mtr On Rack 44202
Free delivery in 1–3 days
£9.29
Visit shop
Product Information
Full details
This Rolson 2pc 25mm x 4.5m Ratchet Tie Down strap set is designed for securing loads during transport or storage. Ideal for DIY enthusiasts and professionals needing reliable load restraint, its key benefit is the secure, adjustable tensioning provided by the ratchet mechanism. A potential caveat is the lashing capacity, which should be matched to the load's weight.
All features
| Model Part Number | 44202 |
|---|---|
| Brand | Rolson |
Extended Product Information
FAQs
What is the lashing capacity of these straps?
The lashing capacity is 250 daN (decaNewtons).
What is the breaking strain of the straps?
The breaking strain is 500 daN (decaNewtons).
How long is each strap?
Each strap is 4.5 meters long.
What is the width of the webbing?
The webbing is 25mm wide.
Can I use these straps for very heavy loads?
The lashing capacity is 250 daN, which is suitable for many loads. For heavier loads, you may need straps with a higher capacity. Always match the strap capacity to the load's weight and transport requirements.
How do I clean the straps?
Clean the straps with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could degrade the webbing.
How often should I inspect the straps?
It is recommended to inspect the straps for any signs of wear, fraying, or damage before each use.
Troubleshooting
Ratchet mechanism is stiff or difficult to operate
Ensure the webbing is not caught in the ratchet gears. Clean any dirt or debris from the mechanism. Apply a small amount of lubricant if necessary.
Strap will not tighten
Check that the webbing is correctly threaded through the ratchet spool. Ensure the ratchet lever is in the correct position for tightening (usually a full upstroke).
Strap loosens over time
Ensure the ratchet mechanism was fully engaged and locked. Check that the load has not shifted, potentially releasing tension. Re-tension as needed.
Webbing appears frayed or damaged
Immediately discontinue use. Replace the strap to ensure safety and prevent load failure. Inspect the load and transport vehicle for any sharp edges that may have caused the damage.
Pros and Cons
Pros
- Secure and adjustable load tensioning
- Durable construction for repeated use
- Versatile length suitable for many applications
- Reliable ratchet mechanism prevents loosening
- Cost-effective solution for load securing
Cons
- Lashing capacity (250 daN) may be insufficient for very heavy loads
- Requires manual operation for tensioning
- Not designed for extreme weather conditions without protection
- Webbing can be susceptible to abrasion if dragged over sharp edges
- Breaking strain (500 daN) should not be exceeded
Setup, Compatibility & Care
Setup: To set up, feed the free end of the strap through the ratchet mechanism's spool and pull it taut. Operate the ratchet handle up and down to tighten the strap around the load until the desired tension is achieved. To release, push the ratchet lever fully down and unwind the strap.
Compatibility: These straps are compatible with most standard tie-down points on trailers, trucks, and vehicle roof racks. Ensure the anchor points are sturdy and rated for the load being secured.
Care: Store the straps in a clean, dry place away from direct sunlight and chemicals when not in use. Inspect the webbing and ratchet mechanism for any signs of wear, fraying, or damage before each use. Clean with a damp cloth if necessary; avoid abrasive cleaners.