Lazer Lamps Boomer Single Universal Light Mounting Frame - For 2 x Carbon-6 Lamps

This Boomer Single Universal Light Mounting Frame is specifically designed for use with two Lazer Lamps Carbon-6 lights.

No, the Lazer Lamps Carbon-6 lights are sold separately and must be purchased in addition to the mounting frame.

While the frame itself is universal, the suitability for road use depends on local regulations regarding auxiliary lighting. It is primarily designed for motorsport applications.

The frame features a 4-way direction adjustment. Specific adjustment points are built into the frame, allowing you to manually tilt and swivel each mounted lamp to achieve the desired beam angle.

The primary advantages are its significantly lighter weight and reduced aerodynamic drag, which can contribute to improved vehicle performance and efficiency.

The frame is engineered to work with the specific dimensions and mounting points of Lazer Lamps Carbon-6 lights. Mounting other brands is not recommended and may compromise security and performance.

The quick-release mechanism allows for fast attachment and detachment. The exact method usually involves a lever or locking pin system, details of which can be found in the product's specific installation manual.

Ensure the vehicle's mounting points are compatible and that all bolts are tightened appropriately. Check for any obstructions on the vehicle or frame mounting surfaces.

Verify that the adjustment screws are not overtightened. Clean any debris from the adjustment mechanism. Refer to individual Carbon-6 lamp instructions for specific aiming procedures.

Clean the quick-release components of any dirt or grime. Apply a small amount of suitable lubricant if recommended by Lazer Lamps (check their general maintenance guidelines).

Ensure lamps are fully seated in the frame and that all securing mechanisms for the lamps are tightened. Re-check the tightness of the main frame mounting bolts.