Best current price£207.60from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£207.60Visit shop OMP First 2” Saloon Harness - Red, Red
Visit shop3 offers from £207.60
View price history by clicking the chart icon.
The OMP First 2" Saloon Motorsport Harness is designed for clubman competitors seeking a reliable and FIA-approved safety solution. Its key benefit is enhanced safety and ease of adjustment, especially when used with an FHR device. A potential consideration is its suitability primarily for saloon racing or rally cars.
| Model Part Number | DA0-0208-A01-061 |
|---|---|
| Brand | OMP |
FIA 8853-2016 is a safety standard set by the Fédération Internationale de l'Automobile. Approval to this standard means the harness has met rigorous testing requirements, including for use with an FHR (Forward Head Restraint) device, ensuring a high level of protection.
Yes, this harness is FIA 8853-2016 approved specifically for use with FHR (Forward Head Restraint) devices, which includes HANS devices.
Pull-up adjusters on the lap belts are tightened by pulling the strap upwards. Pull-down adjusters on the shoulder belts are tightened by pulling the strap downwards. This system is designed for ease of use in a racing environment.
Clean the harness using a soft cloth dampened with water. Avoid using any solvents, detergents, or abrasive cleaners, as these can damage the webbing and compromise safety. Allow the harness to air dry completely.
Yes, the snap hood fittings on the shoulder straps can be detached. This allows the shoulder straps to be wrapped directly around a harness bar, offering an alternative mounting method.
The harness is supplied with 7/16" UNF eye bolts for all attachment points. Metric eye bolts are available for separate purchase if your vehicle requires them.
This harness is specifically designed for saloon racers and rally cars. While it meets high safety standards, its suitability for other forms of motorsport depends on specific vehicle configurations and regulations.
Ensure the adjusters are clean and free from dirt or debris. Gently operate them through their full range of motion. If stiffness persists, a small amount of silicone lubricant can be applied to the moving parts of the adjuster mechanism, but avoid over-application.
Check the fitting for any obstruction or dirt. Ensure the release mechanism is fully engaged before attempting to detach. Clean the fitting thoroughly if dirt is suspected.
Verify that all 6 straps are correctly attached and tensioned. Ensure the pull-up lap adjusters and pull-down shoulder adjusters are properly engaged and tightened to the desired level. Double-check that the quick-release buckle is fully latched.
Confirm that the snap hood fittings have been successfully removed from the end of the shoulder straps. Ensure the harness bar is of a suitable diameter for the straps to pass through and secure properly.
Setup: The harness features 6 straps, each equipped with a snap hood fitting for direct chassis attachment. For mounting to a harness bar, the snap fittings on the shoulder straps can be removed, allowing the straps to be wrapped around the bar. Ensure all attachment points are secure and compliant with motorsport regulations. 7/16" UNF eye bolts are supplied; metric eye bolts are available separately if required. Lap belts use a pull-up adjustment system, while shoulder belts use pull-down adjusters.
Compatibility: This harness is FIA 8853-2016 approved for use with FHR devices. It is specifically designed for saloon racers and rally cars but can be adapted to other vehicles with appropriate mounting points or harness bars. Ensure your vehicle's safety structure can accommodate the harness mounting requirements.
Care: To maintain the harness, clean it gently with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can degrade the fabric. Regularly inspect the straps, adjusters, buckle, and fittings for any signs of wear, fraying, or damage. If any damage is found, the harness should be replaced immediately.
