Shopping.co.uk

3M 7502 Half Mask - Silicone

3M 7502 Half Mask - Silicone

The 3M 7500 Series Half Face Masks are reusable respirators designed for protection against a wide...

Best current price£39.94from Office Stationery

Best offers

Shopping.co.uk recommended and popular offers

All Offers

25 offers from £39.94 - £147.96

View price history by clicking the chart icon.

Office Stationery3M 7502 Silicone Half Mask Blue Large 7503 3M79071
£7.19 delivery
£39.94
Visit shop
UK Office Direct3M 7502 Silicone Half Mask Blue Large
£7.14 delivery
£41.28
Visit shop
Rapid Online - Rapid Electronics Ltd.3M 7503 Half Mask Respirator w/o filter Size: L EN 140 DIN 140
Free delivery in 1–3 days
£47.82
Visit shop
eBay3M 7502 Silicone Half Mask Blue Size L
Free delivery in 1–3 days
£52.35
Visit shop
The PPE Online Shop3M 7502 Med Silicone Half Mask
Free delivery in 1–3 days
£61.25
Visit shop

Product Information

Full details

This guide is for users of the 3M 7502 Half Mask, offering protection against various gases, vapors, and particulates. The mask provides comfort and stability due to its silicone material and CoolFlow valve, making it ideal for extended use in occupational settings. Note that this mask requires the use of separate 3M cartridges and filters, which are sold independently.

All features

Brand3M

Extended Product Information

FAQs

How often should I replace the filters or cartridges?

The replacement frequency depends on the type of filter/cartridge and the exposure level. Follow the manufacturer's instructions and your workplace's safety guidelines.

Can I use this mask with other brands of filters?

No, this mask is designed for use with 3M brand filters and cartridges only.

How do I clean the mask?

Wash the mask with mild soap and water. Rinse thoroughly and allow it to air dry. Do not use solvents or harsh chemicals.

What is the shelf life of the mask?

The shelf life of the mask can vary, but generally, it is several years if stored properly. Always inspect the mask before use.

Where can I find replacement parts?

Replacement parts, such as head straps or valves, can be purchased from 3M distributors or safety equipment suppliers.

How do I perform a fit test?

Follow the fit testing instructions provided by 3M, using either qualitative or quantitative fit testing methods. Proper fit testing is essential for effective protection.

What is the purpose of the CoolFlow valve?

The CoolFlow valve reduces heat and moisture build-up inside the mask, enhancing comfort and reducing fogging.

Troubleshooting

Mask feels uncomfortable or does not seal properly.

Adjust the head straps or try a different size of mask. Ensure there is no facial hair interfering with the seal.

Breathing feels difficult.

Check the filters or cartridges for clogging and replace if necessary. Ensure the correct filter/cartridge is being used for the hazard.

Mask fogs up.

Ensure a proper fit to minimize air leaks. The CoolFlow valve helps reduce fogging but may not eliminate it entirely in all conditions.

Odor is detected while wearing the mask.

Replace the cartridges or filters immediately, as they may be saturated or at the end of their service life.

Pros and Cons

Pros

  • Durable silicone material for extended use.
  • CoolFlow valve for easier breathing and reduced fogging.
  • Dual-mode head harness for versatile wear.
  • Designed for workplace and occupational use.
  • Easy size identification via color coding.
  • Comfortable fit and reduced pressure points

Cons

  • Requires separate purchase of 3M cartridges and filters.
  • Proper fit is crucial for effective protection.
  • Silicone material might not be suitable for all skin types.
  • Regular maintenance and cleaning are needed for optimal performance.
  • User must be trained in the correct use of the mask and filter selection.
  • Not suitable for all environments; check compatibility with specific hazards

Setup, Compatibility & Care

  1. Preparation: Before use, inspect the mask for any signs of damage.
  2. Filter/Cartridge Attachment: Attach the appropriate 3M cartridges or filters according to the instructions provided with the filters. Ensure a secure fit.
  3. Fit Testing: Perform a fit test before each use to ensure a proper seal. Refer to 3M’s fit testing guidelines.
  4. Wearing: Position the mask on your face, adjusting the straps for a snug and comfortable fit.
  5. Compatibility: This mask is compatible with all 3M gas/vapor and particle filters. Ensure the selected filter/cartridge is appropriate for the specific hazard.
  6. Care: After each use, clean the mask with a mild soap and water solution. Rinse thoroughly and allow to air dry. Store the mask in a clean, dry area away from direct sunlight.
  7. Maintenance: Regularly inspect the mask for wear and tear. Replace any worn or damaged parts.

Price History

DatePrice
Visit shop